boAt Enigma Z40
Complete Setup, Technical Specifications & Exhaustive Troubleshooting Manual
Overview: boAt Enigma Z40
The boAt Enigma Z40 exudes sophistication with an ultra-sharp 1.43-inch circular AMOLED display (466×466 pixels), refined metallic bezel, Bluetooth Calling, 100+ active sports modes, and real-time health telemetry via the boAt Crest App.
Step-by-Step Setup & Configuration Guide
1. Full Charge
Connect Enigma Z40 to its magnetic charger and charge for 2 hours with a 5V 2A adapter before first boot.
2. boAt Crest App Setup
Download ‘boAt Crest’ from Play Store or App Store, register via OTP, and accept Bluetooth and Location permissions.
3. Device Pairing
Tap ‘Add Device’ → Select ‘Enigma Z40’ → Confirm pairing on the watch screen.
4. Calling Setup
Pair with ‘Enigma Z40_BT’ in phone Bluetooth settings for direct on-wrist calls.
Technical Specifications
| Specification | Details |
|---|---|
| Model Name | boAt Enigma Z40 |
| Display Type | 1.43″ (3.63 cm) Round Super AMOLED Screen (466 x 466 pixels) |
| Bluetooth Calling | Yes (BLE 5.1, On-Wrist Dial Pad, HD Speaker & Mic) |
| Battery Capacity | 280mAh Lithium Polymer |
| Battery Life | Up to 7 Days Normal Usage / 2 Days BT Calling |
| Charging Type | Magnetic Pogo Cable (5V / 2A Input, ~2 Hours) |
| Water Resistance | IP68 Dust, Sweat & Splash Resistance |
| Sports Modes | 100+ Active Sports Tracking Modes |
| Companion App | boAt Crest App (Android 7.0+ & iOS 13.0+) |
Exhaustive Frequently Asked Questions & Troubleshooting Manual
Charging & Battery Performance FAQs
Q: How do I charge Enigma Z40?
Attach the magnetic pogo-pin cable to the rear charging contacts of the watch and connect to a certified 5V 2A power adapter. Full charge takes around 2 hours.
Q: What should I do if the watch is not charging?
Clean the magnetic charging connector behind the watch with an alcohol swab to remove sweat or lint. Ensure you are using a 5V 2A wall adapter.
boAt Crest App Setup & Bluetooth Calling FAQs
Q: How do I pair Enigma Z40 with the boAt Crest App?
Download ‘boAt Crest’ from Play Store or App Store. Register via mobile OTP, tap ‘Start Setup’ → ‘Add Device’ → Select ‘Enigma Z40’, and confirm the pairing prompt on your watch screen.
Q: How do I configure Bluetooth Calling audio?
Ensure the watch is connected in the Crest app (BLE 5.1). Next, connect to ‘Enigma Z40_BT’ in your smartphone’s Bluetooth settings to route call audio through the watch speaker and mic.
Health Sensors, Stress & Water Resistance FAQs
Q: Why is sleep tracking not recording accurately?
Sleep tracking requires wearing the watch securely overnight for at least 3 hours. Night sleep classification tracks Deep, Light, REM, and Awake stages.
Q: Is Enigma Z40 waterproof?
Yes, it has an IP68 rating, providing complete protection against dust, sweat, and rain splashes during workouts. Avoid hot water, steam, and saunas.
Need Official boAt Support?
If you require further technical assistance or warranty support, contact boAt care:
WhatsApp Support: +91-9667700177
Official Support Page: boAt Enigma Z40 Support