boAt Blitz 2000
Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual
Overview: boAt Blitz 2000
The boAt Blitz 2000 is an unmatchable 100W RMS 2.1 multimedia sound system designed for living rooms, gaming setups, and home entertainment. Built with a heavy MDF wooden subwoofer, dual satellite speakers, dynamic RGB LED display, FM Radio, USB/SD card playback, and infrared remote control.
Step-by-Step Setup & Configuration Guide
1. Satellite Speaker Wiring
Connect the Left (L) and Right (R) satellite speaker cables to the corresponding RCA audio output ports on the rear of the main wooden subwoofer unit.
2. AC Power Connection
Plug the main AC power cord into a standard 220V wall socket and switch the rear Power toggle to ‘ON’.
3. Bluetooth Pairing
Press the ‘Source’ button on the subwoofer or remote control until the front LED display shows ‘BT’. On your phone, select ‘Blitz 2000’ to connect.
4. FM Radio & Audio Inputs
Use the remote to toggle between BT, AUX, USB, SD Card, and FM Radio. Press ‘Scan’ on the remote to automatically tune and store radio channels.
Technical Specifications
| Specification | Details |
|---|---|
| Model Name | boAt Blitz 2000 |
| Audio Output Power | 100W RMS (Heavy Subwoofer + Dual Satellite Speakers) |
| Cabinet Material | Premium Acoustic MDF Wood Subwoofer + ABS Satellites |
| Frequency Response | 30Hz – 20kHz |
| Separation & SNR | ≥45dB Separation | >75dB SNR |
| Bluetooth Version | v5.0 (Up to 10 Meters Range) |
| Power Input | AC 220V – 240V / 50Hz Mains Power |
| Multi-Connectivity | Bluetooth v5.0, FM Radio, USB Drive, SD Card, 3.5mm / RCA AUX |
| Display & Lighting | Digital LED Display Screen + Dynamic Multi-Color RGB Lighting |
| Remote Control | Fully Functional Infrared Wireless Remote Control Included |
Exhaustive Frequently Asked Questions & Troubleshooting Manual
AC Power & Satellite Connection FAQs
Q: How do I connect the satellite speakers to the subwoofer?
Insert the white RCA plug into the Left output and red RCA plug into the Right output on the rear of the subwoofer. Ensure connections are firmly inserted.
Q: What should I do if Blitz 2000 is not powering on?
1. Ensure the power cord is securely plugged into an active 220V socket.
2. Verify the rear Master Power switch is toggled ON.
3. Check if the front LED display illuminates.
Bluetooth, FM Radio & Remote Control FAQs
Q: How do I use FM Radio on Blitz 2000?
Switch source to ‘FM’ on the remote control. Extend the rear FM antenna wire fully and press the ‘Auto Scan’ button on the remote to store channels.
Q: What to do if the remote control is not working?
Ensure fresh AAA batteries are installed in the correct polarity and point the remote directly at the subwoofer front LED sensor.
Bass Control & Audio Quality FAQs
Q: How do I adjust bass and treble on Blitz 2000?
Use the dedicated ‘BASS’ and ‘TREBLE’ rotary dials on the subwoofer console or press the BASS +/- buttons on the remote control.
Q: What should I do if sound is distorted?
Reduce the master volume slightly or lower excessive bass boost on your connected TV or phone media player.
Need Official boAt Support?
If you require further technical assistance or warranty support, contact boAt care:
WhatsApp Support: +91-9667700177
Official Support Page: boAt Blitz 2000 Support