Built to rattle your room, the boAt Aavante Bar Quake channels 200W RMS of boAt Signature Sound through a precision 2.1 channel configuration. The dedicated wired subwoofer digs deep into the low-frequency spectrum while the dual soundbar drivers handle crystalline mids and sharp highs. Bluetooth v5.3 ensures a fast, stable wireless link to your devices, while HDMI (ARC), Optical, AUX, and USB provide comprehensive wired connectivity. Multiple EQ presets let you shape sound for movies, music, or dialogue, and with wall-mounting support and a dedicated remote, the Quake delivers a complete, no-fuss home cinema upgrade.
Step-by-Step Setup & Configuration Guide
1. Subwoofer Connection
Plug the subwoofer cable into SUB OUT on the soundbar rear panel.
2. TV via HDMI (ARC)
Connect HDMI from TV’s HDMI ARC port to soundbar. Set TV audio output to PCM / Fixed. Enable HDMI-CEC.
3. TV via Optical
Remove optical cable caps. Insert into TV Optical Out → soundbar OPT IN. Set TV to Optical SPDIF. Select OPT on remote.
4. Bluetooth Pairing
Press INPUT → BT mode. Search for ‘Aavante Bar Quake’ on your device. Pair and connect.
5. EQ Tuning
Use EQ button on remote: Music → Movie → News. Use BASS +/- for subwoofer level.
Technical Specifications
Specification
Details
Model
boAt Aavante Bar Quake
Audio Output
200W RMS (2.1 Channel — boAt Signature Sound)
Bluetooth Version
v5.3 — Up to 10 Meters Range
Connectivity
Bluetooth v5.3, HDMI (ARC), Optical (TOSLINK), 3.5mm AUX, USB
EQ Modes
Music, Movie, News
Wall Mountable
Yes
Remote Control
Yes — Full-Function IR Remote
Dolby Audio
No
FM Radio
No
Complete FAQ & Troubleshooting Manual
Click each question to expand the full answer. All questions sourced from official boAt support documentation.
Connectivity FAQs
▸ How do I pair via Bluetooth?
Press INPUT on the soundbar or remote to enter BT mode. Search for ‘Aavante Bar Quake’ on your phone and tap to connect.
▸ How do I switch input sources?
Press INPUT repeatedly to cycle: BT → AUX → USB → Optical → HDMI ARC.
▸ Does it work with non-smart TVs?
Yes — use HDMI ARC, Optical, or AUX cable.
▸ Amazon Firestick connection?
Connect Firestick to TV HDMI, then connect soundbar to TV via HDMI ARC or Optical.
Sound Issue Troubleshooting
▸ No sound output?
Check HDMI ARC cable is in the ARC port. Set TV audio to PCM/Fixed. Enable HDMI-CEC.
For Optical: remove caps, set TV to Optical SPDIF.
For BT: LED should be solid blue.
For USB: FAT32 drive with MP3/WAV files.
▸ Distorted or low-quality sound?
Remove source device EQ effects.
Move source closer, remove obstacles.
Try different media player or device.
Test different power socket.
▸ TV audio set to VARIABLE causing issues?
Change TV audio output to FIXED / STANDARD, not Variable.
Remote & Functional FAQs
▸ Remote not working?
Replace batteries. Point at front IR sensor within 5m. Playback buttons don’t work in AUX mode.
▸ Device not powering on?
Check power plugs. Inspect wiring. Power cycle after 2–3 minutes.
▸ Auto standby mode?
Enters standby after 30 minutes of silence. Any button press wakes it up.