EvoFox Hailstone 2

The EvoFox Hailstone 2 is a next-gen mobile cooler engineered for gamers and power users. It combines advanced Peltier cooling, MagSafe compatibility, and real-time temperature display to keep your device cool and your gameplay smooth. Whether you’re grinding through long sessions or recording in 4K, the Hailstone 2 ensures your phone stays frosty and responsive.

1 x EvoFox Hailstone 2 Mobile Phone Cooler1 x USB Type-C Cable (1 Meter)1 x Metal Plate (for non-MagSafe phones)1 x Set of Mounting Clamps1 x User Manual

Peltier Cooling Technology: Cools your phone fast and effectivelyMagSafe Compatibility: Snaps magnetically onto supported iPhones (iPhone 12 and newer)Adjustable Clamps & Metal Plate: For non-MagSafe phones – supports all modelsLive Temperature Display: Shows your phone’s real-time surface temperatureRainbow RGB Lighting: Adds that signature EvoFox gaming flair3 Fan Speed Modes: Choose between L1, L2, and L3 for the perfect cooling intensity

Plug in the USB Type-C cable to the cooler and connect it to a 5V/3A power sourceFor MagSafe phones: Snap the cooler directly onto the backFor non-MagSafe phones:Option A: Stick the included metal plate to the back of your phone or caseOption B: Use the provided clamps to securely fasten the coolerPress the power button to turn on the cooler and adjust fan speed

Fan SpeedsPress the power button to cycle through:L1 – LowL2 – MediumL3 – MaxThe current level will be shown on the display.How Peltier Cooling WorksA thermoelectric plate draws heat away from your phone. The built-in fan then pushes that heat out through an aluminum heat sink for fast and efficient thermal control.Temperature DisplayThe built-in sensor constantly tracks surface temperature, letting you know how cool your phone is running at any time.Using with MagSafe or Non-MagSafe PhonesiPhone 12 or newer? Just snap and goOther phones? Use the metal plate or clamps — both included

Verify 5V/3A inputEnsure cooler is turned on

Factory Reset = Fn+ESC3-Pin Replaceable Switches — Use included puller to swap.

Factory Reset = Fn+ESC3-Pin Replaceable Switches — Use included puller to swap.

Recommended Power SourceUse a 5V/3A adapter or power bank for full performance. Underpowered sources may limit cooling, fan speed, or RGB effects.Can I Charge My Phone Simultaneously?Yes. You can use the cooler while charging your phone — just ensure the power source can handle both loads.

Works with all smartphones – MagSafe or notNot designed for tablets or larger devices

Phone not cooling?Make sure the cooler is securely attachedCheck fan speed (L1–L3)Confirm you’re using a 5V/3A power supplyFan not spinning?Check power cable and sourcePress the power button to cycle onNo temperature reading?Confirm contact with phoneMake sure the cooler is powered on