Official Support & Setup Guide
boAt Aavante Bar Thump
200W RMS 2.1 Channel | 5.25″ Subwoofer | BT v5.3 | HDMI ARC | Optical | Wall Mountable
200W RMS boAt Signature Sound | 5.25″ Sub 40Hz Response | BT v5.3 HDMI ARC & Optical
Verified Source: Official boAt Aavante Bar Thump Support Page
200W RMS
boAt Signature Sound
5.25″ Sub
40Hz Response
BT v5.3
HDMI ARC & Optical
Product Overview
The boAt Aavante Bar Thump punches well above its class with 200W RMS boAt Signature Sound. Its 2.1 channel configuration pairs dual 2.25-inch full-range soundbar drivers with a 5.25-inch dedicated wired subwoofer — a combination that delivers punchy, room-shaking bass alongside precise midrange and extended treble across a 40Hz–20KHz frequency response. Bluetooth v5.3, HDMI (ARC), Optical, AUX, and USB ensure you never run out of ways to connect. Three EQ modes (Music, Movie, News) tailor the signature for the content type. Wall-mountable with an IR remote, the Thump is a no-compromise 2.1 soundbar for anyone serious about their home audio.
Step-by-Step Setup & Configuration Guide
1. Physical Setup
Place the soundbar below your TV on a shelf, or mount it to the wall using the included brackets. Position the subwoofer on the floor near the front wall for maximum bass resonance. Connect the subwoofer cable into the SUB OUT port on the soundbar.
2. TV via HDMI (ARC)
Connect HDMI from TV’s HDMI ARC port to soundbar. On TV: Settings → Sound → Digital Audio Output → PCM / Fixed. Enable HDMI-CEC. Press INPUT → select HDMI ARC.
3. TV via Optical
Remove protective caps from both cable ends. Insert into TV Optical OUT and soundbar OPT IN. Set TV audio to Optical SPDIF. Select OPT on remote.
4. Bluetooth Pairing
Press INPUT → enter BT mode. Search for ‘Aavante Bar Thump’ on your phone. Tap to pair. LED turns solid when connected.
5. AUX Wired Connection
Connect 3.5mm AUX cable from source to soundbar AUX IN. Press INPUT → select AUX mode.
6. USB Playback
Insert FAT32 USB drive with MP3/WAV files. Soundbar auto-switches to USB. Press INPUT if needed to select USB mode.
7. EQ Tuning
Press EQ on remote to cycle: Music → Movie → News. Use BASS +/- for subwoofer level. Movie EQ gives the deepest bass response.
Technical Specifications
| Specification | Details |
|---|---|
| Model | boAt Aavante Bar Thump |
| Audio Output | 200W RMS (2.1 Channel — boAt Signature Sound) |
| Speaker Drivers | 2.25″ × 2 Soundbar Drivers + 5.25″ Wired Deep Bass Subwoofer |
| Frequency Response | 40Hz – 20KHz |
| Signal-to-Noise Ratio | ≥ 70dB |
| Impedance | 4Ω×4 + 8Ω×2 |
| Bluetooth Version | v5.3 — Up to 10 Meters Range |
| Connectivity | Bluetooth v5.3, HDMI (ARC), Optical (TOSLINK), 3.5mm AUX, USB |
| Dimensions | Soundbar: 900×94×70mm | Subwoofer: 190×310×370mm |
| EQ Modes | EQ1 – Music, EQ2 – Movie, EQ3 – News |
| Wall Mountable | Yes |
| Remote Control | Yes — Full-Function IR Remote |
| Dolby Audio | No |
| FM Radio | No |
Complete FAQ & Troubleshooting Manual
Click each question to expand the full answer. All questions sourced from official boAt support documentation.
Connectivity FAQs
▸ How do I connect the Aavante Bar Thump via Bluetooth?
Press INPUT on the remote to switch to BT mode (LED flashes). Search for ‘Aavante Bar Thump’ on your phone’s Bluetooth list and tap to connect. LED turns solid blue when paired.
▸ How do I switch between input sources?
Press the INPUT button repeatedly to cycle through: BT → AUX → USB → Optical → HDMI ARC.
▸ Can I connect an Amazon Firestick directly?
No. Connect the Firestick to the TV’s HDMI, then connect the soundbar to the TV via HDMI ARC or Optical. The TV relays audio to the soundbar.
▸ Does it work with non-smart TVs?
Yes. Use HDMI ARC, Optical, or 3.5mm AUX — all work with any TV regardless of smart capabilities.
Sound Issue Troubleshooting
▸ No sound output from the soundbar — complete troubleshooting checklist:
- AUX: Is the 3.5mm jack fully inserted? Is the source device volume turned up?
- HDMI ARC: Is the cable in the port marked HDMI ARC? TV audio output set to PCM/Fixed? HDMI-CEC enabled?
- Optical: Protective caps removed from both ends? TV audio set to Optical/SPDIF?
- Bluetooth: Is the LED solid (not flashing)? Is audio playing on the paired device?
- USB: Is drive FAT32? Do files have .mp3 or .wav extensions?
- Check for physical damage or fire/sunlight exposure.
▸ Sound is distorted or has low bass — how to fix?
- Disable equalizer effects on your source device (phone, TV settings).
- Move source device closer, remove obstacles.
- Distortion at extreme volumes is normal — reduce volume.
- Increase BASS level using BASS+ on remote, or switch to Movie EQ.
- Try different media player apps or another device.
▸ TV audio output is set to VARIABLE — will it cause issues?
Yes. If TV audio output is set to VARIABLE, the soundbar may receive inconsistent audio levels. Change TV setting to FIXED or STANDARD audio output.
Remote Control Issues
▸ Remote not working?
- Replace batteries — check polarity (+/-).
- Aim directly at the front IR sensor (within 5 metres).
- In AUX mode, playback controls are disabled — switch to BT/USB for full remote control.
- Select the correct input source before using playback buttons.
- Check for physical damage or bent contact pins.
▸ In-built buttons not responding?
Check you are in a supported mode (BT/USB/OPT/ARC). AUX mode disables most buttons. Power cycle the unit by unplugging for 30 seconds.
Other Functional FAQs
▸ Device not powering on?
- Check both soundbar and subwoofer are plugged into active wall sockets.
- Check for loose wiring or damaged power cables.
- Switch off power for 2–3 minutes, then retry.
▸ How does Auto Standby work?
After 30 minutes of no audio input, the Aavante Bar Thump enters standby automatically. Press any button or send an audio signal to wake it.
▸ Does it support Dolby Audio?
No, the Aavante Bar Thump does not support Dolby Audio.
▸ Does it support Alexa?
No.
▸ Does it have FM radio?
No built-in FM radio.
▸ Is it wall mountable?
Yes — wall-mount brackets are included. Seller does not provide installation service.
▸ Can the subwoofer work independently?
No — it only functions when connected to the Aavante Bar Thump soundbar.
🔧 Need More Help? Contact boAt Support
📞 Phone: 022-6918-1920 (Mon–Sat, 9 AM–7 PM IST)
💬 WhatsApp: +91-9667700177
🌐 Official Page: boAt Aavante Bar Thump Support Documentation
💬 WhatsApp: +91-9667700177
🌐 Official Page: boAt Aavante Bar Thump Support Documentation