1. Ensure Bluetooth is ON and the headphones are in pairing mode (hold MFB for 5 seconds until alternating red/blue LEDs flash)
2. Confirm the device is within 10m range with no obstructions
3. If prompted for a passcode, enter 0000
4. Clear the pairing list with a factory reset: hold MFB + Volume “-” for about 5 seconds in standby mode (or long-press Vol.+ and Vol.- together for 4 seconds)
5. Check for software issues on your phone; try forgetting the device or updating mobile software

1. Clear “Rockerz Plus 550 ANC” from your device’s pairing history first
2. Long press Volume + and Volume – simultaneously for 4 seconds to reset and clear paired device history
3. Re-pair the headphones with your device

1. Test the charging cable on another device, or try a different cable
2. Use only 5V/2A chargers – incorrect voltage can damage the device
3. Charge until the red light turns completely blue
4. Check the battery hasn’t been tampered with or exposed to electrical damage
5. Clean the charging port with a cotton swab if clogged with dirt
6. Confirm the adapter and cable support fast charging

1. Set your phone’s equalizer to normal/default/none/0 (see phone-specific EQ paths below)
2. Perform a factory reset
3. Clean the headphones if clogged with ear wax or debris

1. Check equalizer settings on the connected device
2. Test with a different media player or device to isolate the issue

1. Use only 5V/2A chargers for the correct voltage
2. Check for mishandling, broken wires, exposure to direct sunlight, or other hazards

1. Unpair/Forget the device and pair again
2. Test controls when connected to a different device
3. Verify the media player supports Bluetooth controls
4. Check for physical damage or exposure to hazards

1. Check that Google Assistant or Siri is enabled on your paired device
2. Triple-press the MFB and release; this may be restricted by default on some devices

1. Short press the dedicated ANC button to cycle: Ambient → ANC ON → Normal Mode
2. Ensure the ear cushions form a proper seal against your ears for best ANC performance
3. Restart the headphones or perform a factory reset if ANC remains unresponsive

1. Restart the headphones
2. Perform a factory reset
3. Ensure no objects obstruct the connection; move closer to your device
4. Check the microphone hole for dirt or earwax and clean gently

Rockerz Plus 550 ANC offers up to 80 hours of total playback at approximately 60% volume. Full charging takes about 2.5 hours.

Short press the dedicated ANC button to cycle through Ambient, ANC ON, and Normal Mode (ANC off). Press again to continue cycling through the modes.

Yes, Rockerz Plus 550 ANC features 40dB Hybrid Active Noise Cancellation, switchable via the dedicated ANC button.

Yes, Rockerz Plus 550 ANC includes ENx™ technology for clearer voice calls.

Rockerz Plus 550 ANC supports BEAST™ Mode for low latency, suitable for casual gaming and entertainment, but it is not designed for professional gaming equipment needs.

boAt’s patented fast-charging technology that can deliver up to 10 hours of playback from just 10 minutes of charging, depending on conditions. Follow the charging norms in the user manual for best results.

No. Clear Voice Capture (cVc) technology, used for noise cancelling and selective listening enhancement, is not supported on this model.

No, Rockerz Plus 550 ANC does not support the Qualcomm aptX codec.

Rockerz Plus 550 ANC has a maximum Bluetooth transmission range of 10 meters under normal conditions with no obstructions.

Double press the MFB to activate BEAST™ Mode for low latency. Double press again to switch back to regular music mode.