boAt Watch Flash Plus
Complete Setup, Technical Specifications & Exhaustive Troubleshooting Manual
Overview: boAt Watch Flash Plus
The boAt Watch Flash Plus upgrades the classic Flash series with a 1.39-inch HD circular touchscreen, crystal-clear Bluetooth Calling, 100+ active sports modes, and real-time health telemetry via the boAt Crest App.
Step-by-Step Setup & Configuration Guide
1. Charge to 100%
Plug the magnetic charging cable into a 5V 2A adapter and charge the Flash Plus fully before first use.
2. Install boAt Crest App
Download ‘boAt Crest’ from Google Play Store or Apple App Store and complete phone number OTP verification.
3. Bind Device
Open the app, tap ‘Add Device’, select ‘Flash Plus’, and tap ‘Pair’ on your watch screen.
4. Pair BT Audio
In your phone Bluetooth menu, connect to ‘Flash Plus_BT’ to enable voice calling.
Technical Specifications
| Specification | Details |
|---|---|
| Model Name | boAt Watch Flash Plus |
| Display Type | 1.39″ (3.53 cm) Round HD Capacitive Color Touchscreen |
| Bluetooth Calling | Yes (BLE 5.0, On-Wrist Dial Pad, Microphone & Speaker) |
| Battery Capacity | 260mAh Lithium Polymer |
| Battery Life | Up to 7 Days Normal Usage / 2 Days BT Calling |
| Charging Type | Magnetic Contact Cable (5V / 2A Input, ~2 Hours) |
| Water Resistance | IP68 Dust, Sweat & Splash Resistance |
| Sports Modes | 100+ Active Sports Tracking Modes |
| Companion App | boAt Crest App (Android 7.0+ & iOS 12.0+) |
Exhaustive Frequently Asked Questions & Troubleshooting Manual
Charging & Battery Performance FAQs
Q: How do I charge Watch Flash Plus?
Attach the magnetic pogo-pin cable to the rear charging contacts of the watch and connect to a certified 5V 2A power adapter. Full charge takes around 2 hours.
Q: What should I do if the watch is not charging?
Clean the magnetic charging connector behind the watch with an alcohol swab to remove sweat or lint. Ensure you are using a 5V 2A wall adapter.
boAt Crest App Setup & Bluetooth Calling FAQs
Q: How do I pair Watch Flash Plus with the boAt Crest App?
Download ‘boAt Crest’ from Play Store or App Store. Register via mobile OTP, tap ‘Start Setup’ → ‘Add Device’ → Select ‘Flash Plus’, and confirm the pairing prompt on your watch screen.
Q: How do I configure Bluetooth Calling audio?
Ensure the watch is connected in the Crest app (BLE 5.0). Next, connect to ‘Flash Plus_BT’ in your smartphone’s Bluetooth settings to route call audio through the watch speaker and mic.
Health Sensors, Stress & Water Resistance FAQs
Q: Why is sleep tracking not recording accurately?
Sleep tracking requires wearing the watch securely overnight for at least 3 hours. Night sleep classification tracks Deep, Light, REM, and Awake stages.
Q: Is Watch Flash Plus waterproof?
Yes, it has an IP68 rating, providing complete protection against dust, sweat, and rain splashes during workouts. Avoid hot water, steam, and saunas.
Need Official boAt Support?
If you require further technical assistance or warranty support, contact boAt care:
WhatsApp Support: +91-9667700177
Official Support Page: boAt Watch Flash Plus Support