boAt Stone Arc
Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual
Overview: boAt Stone Arc
The boAt Stone Arc is a high-performance 20W portable Bluetooth speaker powered by dual 58mm acoustic drivers, Bluetooth v5.4, vibrant RGB lighting effects, TWS stereo link (40W total output), and an impressive 12 hours of battery endurance.
Step-by-Step Setup & Configuration Guide
1. Initial Charging
Connect the provided Type-C USB cable to a 5V 2A adapter. Charge for 2.5 hours until the red LED indicator turns off.
2. Bluetooth v5.4 Pairing
Press and hold the Power button for 3 seconds. The white LED will flash. On your phone, select ‘Stone Arc’ from the Bluetooth list to connect.
3. TWS True Wireless Stereo Mode
Turn on two Stone Arc units. Long press the TWS button on one unit until you hear a chime. Connect your phone to the master speaker for 40W stereo.
4. Mode Switching
Short press the ‘M’ (Mode) button to switch between Bluetooth, AUX, and TF Card playback.
Technical Specifications
| Specification | Details |
|---|---|
| Model Name | boAt Stone Arc |
| Audio Output Power | 20W RMS (Dual 58mm Full-Range Acoustic Drivers) |
| Frequency Response | 100Hz – 20kHz |
| Bluetooth Version | v5.4 (Up to 10 Meters Working Range) |
| Battery Capacity | 2200mAh Rechargeable Lithium-ion |
| Playtime Endurance | Up to 12 Hours (at 60% Volume) |
| Charging Interface | Type-C USB (Input Voltage: 5V / 2A) |
| Charging Time | 2 to 2.5 Hours Full Charge |
| Multi-Connectivity | Bluetooth v5.4, 3.5mm AUX, TF Card / Micro SD (MP3 Format) |
| Lighting | Dynamic Multi-Color RGB Lighting Effects |
| Water Resistance | IPX5 Splash & Sweat Resistant |
| Special Features | TWS Function (Connect 2 Stone Arc Units for 40W Stereo) |
Exhaustive Frequently Asked Questions & Troubleshooting Manual
Charging & Battery Performance FAQs
Q: How do I charge Stone Arc?
Connect the USB Type-C cable to a 5V 2A wall charger. The red LED indicator glows during charging and turns off when full (approx. 2 to 2.5 hours).
Q: What should I do if the speaker is not charging?
Clean the Type-C charging port with a dry cotton swab. Ensure you are using a certified 5V adapter and not a high-voltage fast charger.
Bluetooth Pairing & Audio Quality FAQs
Q: What should I do if Stone Arc is not connecting via Bluetooth?
1. Ensure the speaker is in pairing mode (flashing white LED).
2. Double press the ‘M’ button to clear existing connections.
3. Keep the phone within 10 meters and unpair old Bluetooth records.
Q: Why is audio distorted or low volume?
Ensure the battery is not depleted (low battery causes audio clipping). Turn off heavy equalizer bass boosts on your media player.
Water Resistance & Factory Reset FAQs
Q: Is Stone Arc waterproof?
Yes, it has an IPX5 rating, protecting against water splashes, rain, and sweat. Ensure the rear port seal is tightly closed.
Q: How do I reset Stone Arc?
Insert a small pin into the Reset port and gently press the internal switch to restore factory settings.
Need Official boAt Support?
If you require further technical assistance or warranty support, contact boAt care:
WhatsApp Support: +91-9667700177
Official Support Page: boAt Stone Arc Support