Amkette Drive S1

• Ensure your car supports wired CarPlay or Android Auto
• Confirm Wi-Fi is enabled on your phone
• Check Bluetooth pairing with “Amkette Drive”
• Restart the car infotainment system and retry

• Ensure the phone remains within the car cabin
•  Avoid switching networks during use
• The device performs best on the 5.8 GHz Wi-Fi band

• Try switching between USB-A and USB-C connectors
• Confirm the USB port supports data, not charging only

Drive works only when plugged into the car’s OEM wired CarPlay/Android Auto USB data port, not a charging-only port. Ensure it is connected to the same USB port used for wired CarPlay or Android Auto.

The most common cause is an incorrect USB port or unstable USB data/power.
• Plug Drive into the OEM USB port that supports wired CarPlay/Android Auto.
• If multiple ports are available, try the other infotainment USB data port.
• Avoid using USB hubs, splitters, extensions, or converters during setup or troubleshooting.

• Wireless CarPlay/Android Auto relies on a Wi-Fi link after pairing.Keep the phone closer to the head unit (dashboard area).• Turn off hotspot or Wi-Fi sharing on the phone while using Drive.• If the issue occurs only in specific locations (such as basements or dense traffic zones), reconnect once after moving away from that area.

Phone updates may reset wireless permissions or pairing behavior.
• Restart the phone once.
• Perform a Forget & Re-Pair using the Clean Reset method.

Follow these steps to rebuild the pairing from scratch:1. Unplug Drive from the car’s USB port.2. On your phone:
• Forget “Drive S1” from Bluetooth.
• If it appears in saved Wi-Fi networks, forget it there as well.
• On iPhone, also remove it from CarPlay if it appears under your car’s CarPlay profile.3. Plug Drive back into the OEM wired CarPlay/Android Auto USB data port.4. Open Bluetooth and pair with Drive S1.5. Tap Allow / Pair / Use CarPlay / Enable Android Auto on all prompts.After completing these steps, Drive should connect normally

The box contains:
• 1x Amkette Drive Wireless CarPlay & Android Auto Adapter
• User Manual

• Converts wired Apple CarPlay and Android Auto into fully wireless connectivity
• Wi-Fi 6 (AX1800) for fast, low-latency in-car performance
• Operates on the 5.8 GHz band to avoid signal interference
• Dual USB-A and USB-C connectors for broad vehicle compatibility
• Bluetooth 5.4 for quick pairing and stable handoff to Wi-Fi
• Ultra-compact 12 g design for hidden, clutter-free installation
• Premium aluminum + ABS construction for durability and heat control

• Plug the adapter into your car’s USB-A or USB-C port
• Enable Wi-Fi on your smartphone
• Pair via Bluetooth when “Amkette Drive” appearsThe device reconnects automatically on future drives.

No. Amkette Drive works without any additional apps or software.

The initial setup takes only a few seconds.

The adapter first pairs via Bluetooth and then switches to a high-speed Wi-Fi 6 connection to deliver smooth navigation, calls, music, and messaging.

The 5.8 GHz band is less crowded inside vehicles, reducing interference and improving reliability.

No. The ultra-compact 12 g design stays discreetly behind the dashboard, keeping the cabin clean and clutter-free.

The adapter features an aluminum top shell with an ABS bottom for improved durability, heat dissipation, and long-term reliability.

No. The device is designed to operate reliably in temperatures ranging from –20°C to +70°C.

Amkette Drive draws power directly from your car’s USB-A or USB-C port. No internal battery or external power source is required.

Yes. The adapter powers on and off with the car’s USB system, ensuring it operates only when the vehicle is in use.

Yes. The ultra-efficient design, aluminum + ABS construction, and wide operating temperature range (–20°C to +70°C) ensure stable power handling and reliable performance during extended use.

Amkette works with any car that has wired Apple CarPlay or wired Android Auto via USB-A or USB-C.

Yes. A single adapter supports both platforms seamlessly.

Yes. Steering wheel controls, touchscreens, knobs, and factory buttons continue to work normally for an OEM-like experience.