Amkette Hush Pro Byte Plus

The mouse supports up to 1600 DPI .

This Mouse has a 500 mAh rechargeable battery.

The mouse uses Silent Switches for quiet and smooth experiance .

Press FN + 1/2/3 to toggle the connection mode.

Slide the 3 way bottom switch to 2.4Ghzor Bluetooth  to power up, and slide the switch in the centre  to shut down the mouse

Plug in the USB receiver, switch the mouse to 2.4GHz mode, and it’s ready to use.

Slide the Bottom Switch to Bluetooth side, and connect via your device’s Bluetooth settings.

The USB receiver is securely stored in a slot at the bottom of the mouse.

Use the Mode Switch button at the bottom to toggle between 2.4GHz, and Bluetooth mode.

Yes, the mouse can be used while charging.

Use the DPI Button to set DPI levels up to 1600 and adjust them to your preference.

800 – 1200(Default) – 1600

There are 2 Modes of connectivity – 2.4GHz and Bluetooth.

Yes, the mouse battery can be recharged with the help of Type-C cable.

The mouse includes  power-saving mode to maximize battery life and reduce downtime.

Press FN + 1/2/3 to toggle the connection mode.

Press FN + 1/2/3 to toggle the connection mode.

Press FN + 1/2/3 to toggle the connection mode.

– Windows, Linux etc – iOS and Mac Devices- Android

Press FN + 1/2/3 to toggle the connection mode.

Press FN + 1/2/3 to toggle the connection mode.

Press FN + 1/2/3 to toggle the connection mode.

Ensure the USB receiver is properly plugged in. Toggle the mode switch to 2.4GHz and check if the battery is sufficiently charged. If still unresponsive, try a different USB port or restart your device.

Make sure the mouse is charged and within range. Remove the pairing from your device’s Bluetooth settings and reconnect using the pairing button. Avoid interference from other wireless devices.

Press FN + 1/2/3 to toggle the connection mode.

Press FN + 1/2/3 to toggle the connection mode.