Amkette Hush Pro Epic M

The mouse supports up to 3200 DPI .

This Mouse has a 400 mAh rechargeable battery.

The mouse uses Silent Switches for quiet and smooth experiance .

Yes, Forward/Backward Buttons are present on the left sideof the mouse .

Slide the ON/OFF Switch at the bottom of the mouse

Plug in the USB receiver, switch the mouse to 2.4GHz mode with the mode switch button , and it’s ready to use.

Press the Mode Switch to Bluetooth, and connect via your device’s Bluetooth settings.

The USB receiver is securely stored in a slot at the bottom of the mouse.

Use the Easy Switch button at the Top to toggle between 2.4GHz, and two Bluetooth Devices.

Yes, the mouse can be used while charging.

Use the DPI Button at the bottom to set DPI levels up to 3200 and adjust them to your preference.

800 – 1200 – 1600 – 3200

There are 2 Modes of connectivity – 2.4GHz and Bluetooth.

Yes, the mouse battery can be recharged with the help of Type-C cable.

3 Devices are Supported , 1 x 2.4Ghz and 2 x Bluetooth devices.

Yes,The S201 sensor ideal for High prevision tasks like gaming and graphic designing is integrated.

Yes, Battery Level Indicator is integrated at the bottom

Yes, Mode Indicator is integrated at the Top.

The mouse includes  power-saving mode to maximize battery life and reduce downtime.

Press FN + 1/2/3 to toggle the connection mode.

Press FN + 1/2/3 to toggle the connection mode.

Press FN + 1/2/3 to toggle the connection mode.

– Windows, Linux etc – iOS and Mac Devices- Android

Press FN + 1/2/3 to toggle the connection mode.

Press FN + 1/2/3 to toggle the connection mode.

Press FN + 1/2/3 to toggle the connection mode.

Ensure the USB receiver is properly plugged in. Toggle the mode switch to 2.4GHz and check if the battery is sufficiently charged. If still unresponsive, try a different USB port or restart your device.

Make sure the mouse is charged and within range. Remove the pairing from your device’s Bluetooth settings and reconnect using the pairing button. Avoid interference from other wireless devices.

Press FN + 1/2/3 to toggle the connection mode.

Press FN + 1/2/3 to toggle the connection mode.