Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual
The boAt Party Pal 600 is a colossal 160W RMS (220W Peak) sound monster engineered for grand parties, outdoor concerts, and live performances. Outfitted with massive dual 10-inch woofers, dual 2.5-inch tweeters, dynamic animated text display, guitar input, wired microphone karaoke support, TWS sync, and boAt Hearables App equalizer control.
Connect the provided AC power cord into the AC input port on the rear of Party Pal 600 and plug into a standard 220V wall socket. Charge for 7 hours before the first portable event. The charging indicator LED glows red during charging and turns green when 100% full.
Turn the Master Power switch to ON. Press the ‘Mode’ button until the LED display shows ‘BT’ (Bluetooth mode). Open your phone/tablet Bluetooth menu, search for ‘Party Pal 600’, and tap to connect.
Download the ‘boAt Hearables’ app from Play Store or iOS App Store. Connect Party Pal 600 to adjust club bass profiles, tweak dynamic equalizer presets, and configure animated LED text banners.
To link two Party Pal 600 speakers: Turn on both units in Bluetooth mode. On one speaker, press and hold the TWS button for 2 seconds. The speakers will chime and bond. Connect your smartphone to the master speaker to enjoy synchronized 320W dual stereo.
Insert your 6.35mm wired microphone into the ‘MIC IN’ jack and guitar cable into ‘GUITAR IN’. Adjust dedicated Mic Volume, Echo Control, and Guitar Volume dials on the top console.
| Specification | Details |
|---|---|
| Model Name | boAt Party Pal 600 |
| Audio Output Power | 160W RMS / 220W Peak Power |
| Speaker Drivers | Dual 10″ High-Performance Woofers (60W x 2) + Dual 2.5″ Tweeters (15W + 10W) |
| Frequency Response | 45Hz – 20kHz |
| Bluetooth Version | v5.0 (Up to 10 Meters Range) |
| Battery Capacity | 12V 7500mAh Rechargeable Lead-Acid Battery |
| Playtime Endurance | Up to 7 Hours (at 60% Volume with LEDs Active) |
| Charging Interface | AC Power Cable (Charging Time: ~7 Hours) |
| Multi-Connectivity | Bluetooth, USB Drive, TF Card, 3.5mm AUX, Guitar IN, Wired Mic IN |
| Special Features | Animated LED Text Display, DJ Sound Effects, Audio Recording to USB/TF, TWS Mode |
| Companion App | boAt Hearables App (Custom EQ & Sound Profiles) |
| Dimensions & Weight | 1005 x 415 x 410 mm | Net Weight: 15.0 kg |
Yes, you can operate Party Pal 600 directly from AC mains power while it charges. Plug the supplied AC cord into a 220V socket. Full charge takes approx. 7 hours for the 12V 7500mAh battery.
1. Connect the AC power cable directly to a wall socket to check if the battery has drained completely.
2. Verify the rear power toggle switch is turned to ‘ON’ / ‘AC’.
3. Inspect the fuse on the power panel if there was an electrical surge.
1. Press the ‘Mode’ or ‘BT’ button to ensure the speaker display reads ‘BT’.
2. Disconnect previous paired devices by long-pressing the Play/Pause button.
3. Keep the smartphone within 10 meters without heavy physical obstacles.
4. Restart the speaker and forget the device in phone Bluetooth settings.
Insert a formatted USB drive (FAT32) into the USB slot. Connect your microphone or guitar, press the ‘REC’ button to begin recording your performance, and press ‘REC PLAY’ to listen back.
1. Keep the microphone at least 1–2 meters away from the front 10-inch speaker grilles.
2. Turn down the ‘ECHO’ dial slightly on the top mixing console.
3. Adjust ‘MIC VOL’ to a balanced level.
Ensure your phone audio source is not clipping. Turn off third-party phone equalizers, and ensure the battery is not critically low (low voltage causes amplifier clipping).
If you require further technical assistance or warranty support, contact boAt care:
Official Support & Troubleshooting Guide boAt Blitz 2000 Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual 100W RMS 2.1…
Official Support & Troubleshooting Guide boAt Party Pal 200 Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual 70W RMS…
Official Support & Troubleshooting Guide boAt Party Pal 208 Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual 70W RMS…
Official Support & Troubleshooting Guide boAt Party Pal 320 Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual 160W RMS…
Official Support & Troubleshooting Guide boAt Party Pal 185 Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual 50W RMS…
Official Support & Troubleshooting Guide boAt Party Pal 195 Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual 50W RMS…