Categories: Boat Support

boAt Rockerz 109 – Complete Support Guide with Specifications & FAQs

šŸ“„ Original Source: boAt Official Support ā€“ Rockerz 109

boAt Rockerz 109

Neckband Earphones with 40 Hours Playback & ENxā„¢ Technology

Grooving, Working, All Day Long

Rock to your favourite tunes with Rockerz 109ā€™s 40 hours of playback and ASAPā„¢ Charge so there are barely any breaks in your entertainment. With ENxā„¢ Technology you get call clarity to the max for work while BEASTā„¢ Mode takes care of your gaming:

  • 10mm x 2 Drivers ā€“ boAt Signature Sound
  • ENxā„¢ Technology ā€“ Call clarity for work calls
  • BEASTā„¢ Mode ā€“ 60ms low latency for casual gaming
  • ASAPā„¢ Charge ā€“ Fast top-up charging
  • Dual Pairing ā€“ Connect two devices simultaneously
  • Bluetooth 5.3 ā€“ Stable 10m connection
  • IPX5 Water Resistant ā€“ Built for durability

Key Features at a Glance

šŸŽµ 40 Hours Playtime

Music playtime and talk time per charge

āš” ASAPā„¢ Charge

Fast charging for quick top-ups

šŸŽ® 60ms BEASTā„¢ Mode

Low latency mode for casual gaming

šŸ”— Dual Pairing

Connect two devices at the same time

Full Specifications

Specification Details
Type Bluetooth Wireless Neckband Earphones
Bluetooth Version V5.3
Driver Size 10mm Ɨ 2
Music Playtime Up to 40 Hours per charge
Talk Time Up to 40 Hours per charge
Battery Capacity 210mAh
Charging Time About 50 Minutes
Charging Interface USB Type-C
Frequency Response 20Hz ā€“ 20kHz
Transmission Range 10 Meters
Water Resistance IPX5
Latency 60ms (BEASTā„¢ Mode)
Dual Pairing Yes
aptX Codec Yes
cVc Technology Yes

Technology & Features

ENxā„¢ Technology

Environmental noise cancellation technology that helps reduce background noise for clearer voice calls ā€“ ideal for work calls.

BEASTā„¢ Mode (Low Latency)

Rockerz 109 features 60ms low latency for entertainment needs, automatically active once connected without needing a trigger. Itā€™s suitable for casual gaming, but not intended for professional gaming equipment needs. Triple press the MFB to activate or deactivate.

ASAPā„¢ Charge Technology

10 Minutes = 10 Hours of Playback

boAtā€™s patented fast-charging technology provides exceptional battery efficiency (may vary by conditions). Use a Type-C 5V/3A adapter for ASAPā„¢ Charge to work effectively.

Dual Pairing

Connect Rockerz 109 to your first device, then switch off both the earphones and that deviceā€™s Bluetooth. Connect to your second device, then switch the first deviceā€™s Bluetooth back on ā€“ the earphones will connect to both. If they donā€™t reconnect automatically, pair to the first device manually once more.

cVc Noise Cancellation & aptX

Rockerz 109 includes Qualcommā€™s Clear Voice Capture (cVc) technology for noise cancelling and enhanced selective listening, and supports the Qualcomm aptX codec (requires aptX support on the connected media device too).

Button Controls

Action Function
Long press MFB (3 sec) from switched off Power ON (blue LED flashes 1 sec, voice tone confirms)
Continue holding MFB to 5 sec from switched off Power ON + Enter pairing mode (red & blue LEDs flash alternately)
Press & hold MFB (5 sec) while powered on Power OFF (red LED flashes once, voice tone confirms)
Long press both Volume Up + Volume Down together (5 sec) Factory Reset / Clear paired devices (red & blue LEDs flash 1 sec)
Short press MFB once Play/Pause, Answer/End call
Double press MFB Reject call (during ring)
Long press MFB (1.5 sec) Activate Voice Assistant
Triple press MFB Toggle BEASTā„¢ Mode (low latency) on/off
Press & hold Volume Up (1.5 sec) Next Track
Press & hold Volume Down (1.5 sec) Previous Track
Short press Volume +/- Adjust Volume

Pairing & Connectivity

Initial Pairing

  1. When switched off, press & hold the MFB for 5 seconds to power on and enter pairing mode
  2. The blue and red LEDs flash alternately to indicate pairing mode
  3. Open Bluetooth settings on your device and search for ā€˜Rockerz 109ā€™
  4. Select the device from the list; enter passcode 0000 or 1234 if prompted
  5. Once connected, the blue LED flashes once every 5 seconds to confirm pairing

Note: The neckband automatically turns off if no connection is established within 5 minutes of entering pairing mode.

Dual Pairing (Connect 2 Devices)

  1. Connect the earphones to your first device, then turn off both the earphones and the first deviceā€™s Bluetooth
  2. Turn on the earphones and connect to your second device, then turn on the first deviceā€™s Bluetooth
  3. The earphones will connect to both devices; if not, connect the first device manually once again to activate dual pairing

LED Indicator Guide

  • Power ON: Blue LED flashes for 1 second
  • Pairing mode: Red and blue LEDs flash alternately; blue LED stays solid for 3 seconds after successful pairing
  • Connected: Blue LED flashes once every 5 seconds
  • Power OFF: Red LED flashes once
  • Charging: Solid red LED
  • Fully charged: Red LED turns off
  • Low battery (below 20%): Red LED flashes quickly with a ā€œLow Batteryā€ prompt every few minutes
  • Factory reset successful: Red and blue LEDs stay lit for 1 second, then resume blinking

Charging & Battery

How to Charge

  • Plug the USB Type-C cable into the neckband and connect the other end to a computer or wall adapter
  • Use a 5V/2A wall adapter
  • Full charge takes about 1 hour
  • Solid red LED indicates charging; the LED turns off once fully charged
  • Note: The neckband cannot be turned on while charging

Troubleshooting Guide

Bluetooth Connectivity Issues

Neckband not connecting via Bluetooth
  1. Check the earphones are in pairing mode (alternating red/blue LED flashes) by holding the MFB for 3 seconds
  2. Clear the pairing list by holding the Volume Up and Volume Down buttons together for 5 seconds in standby mode
  3. Confirm the device is within 10m range with no obstructions
  4. Check the connecting device supports Bluetooth connections
  5. If prompted for a passcode, try 0000 or 1234
  6. Check for software issues on your phone; try forgetting the device or updating mobile software
Unable to dual pair with two phones
  1. Pair to the first phone as per usual procedure, then switch off both the earphones and the first phoneā€™s Bluetooth
  2. Switch on the earphones and connect to the second phone, then switch on the first phoneā€™s Bluetooth
  3. The earphones should reconnect to the first phone with both phones now paired
  4. Try dual pairing with other devices to isolate the issue
One side not working or disconnecting frequently
  1. Restart the device
  2. Try a factory reset
  3. Check if the same issue happens on different devices and media players
  4. Clear obstructions and move the device closer to the earphones

Charging Issues

Neckband not charging or battery life is low
  1. Test the charging cable with another device
  2. Use only a 5V/2A wall adapter
  3. Check the charging is done until the red light turns off
  4. Verify the battery wasnā€™t tampered with or exposed to electrical damage
  5. Check for dirt or debris in the charging port and clean with a cotton swab
  6. Confirm the adapter and cable support fast charging

Sound Issues

Sound is distorted, low volume, low bass, or muffled
  1. Set your phoneā€™s equalizer to normal/default/none/zero (see phone-specific EQ paths below)
  2. Reset the device or clear the paired devices list
  3. Ensure thereā€™s no obstruction and youā€™re within the 10m Bluetooth range
  4. Clean ear wax buildup with a cotton swab and alcohol, then gently blow dry from a distance
Volume changes automatically
  1. Check equalizer settings on the connected device
  2. Reset the device or clear the paired devices list

Power & Control Issues

Neckband doesnā€™t turn on
  1. Confirm the device has been fully charged first, until the red light turns off
  2. Use only 5V/2A chargers
  3. Check for mishandling, broken wires, or exposure to direct sunlight or fire hazards
Built-in controls not working
  1. Test whether controls work while connected to a different device
  2. Forget the device and pair it again
  3. Verify the media player supports these controls
  4. Check for physical damage or hazard exposure
Voice assistant doesnā€™t wake up
  1. Check that Google Assistant or Siri is enabled on your paired device
  2. Long press the MFB for 1.5 seconds and release to activate; this may be restricted by default on some devices

Microphone Issues

Microphone not working
  1. Reset your Rockerz 109
  2. Ensure the microphone is not being blocked by any particles
  3. Hold the microphone at an adequate distance to pick up your voice
  4. Test by recording your voice on a voice recorder to confirm the mic is working
  5. Check it wasnā€™t exposed to hazards like direct sunlight, fire, or water beyond its resistance rating

Phone-Specific EQ Settings

Phone Brand EQ Path
Vivo i Music > Audio effect > Deep space sound effects > Equalizer
Xiaomi Settings > Sound & vibration > Sound effects > Graphic equalizer
Samsung Settings > Sound quality and effects > Equalizer
Realme Settings > Sound > Equalizer (varies by UI version)
Oppo Settings > Sound & vibration > Equalizer
Apple Settings > Music > EQ
Motorola Settings > Sound > Audio effects
Poco Settings > Sound & Vibration > Graphic Equalizer
OnePlus Settings > Sound Quality & Effects > Audio Tuner

Frequently Asked Questions

How long is the battery life?

Rockerz 109 offers up to 40 hours of music playtime and talk time per charge. Full charging takes about 50 minutes.

What is ASAPā„¢ Charge?

boAtā€™s patented fast-charging technology that provides up to 10 hours of playback from just 10 minutes of charging (may vary by conditions). Use a Type-C 5V/3A adapter for ASAPā„¢ Charge to work effectively.

Is it good for gaming?

Rockerz 109 features 60ms low latency BEASTā„¢ Mode, suitable for entertainment and casual gaming, but itā€™s not intended for professional gaming equipment needs. Low latency activates automatically once connected, no trigger required.

Does it have Environmental Noise Cancelling?

Yes, Rockerz 109 includes ENxā„¢ technology for clearer voice calls, ideal for work calls.

Can I connect two devices at the same time?

Yes, Rockerz 109 supports dual pairing. Pair to your first device, switch both off, pair to your second device, then switch the first deviceā€™s Bluetooth back on to connect both.

Does it support the aptX codec?

Yes, Rockerz 109 supports the Qualcomm aptX codec, but the connected media device must also support aptX for it to work.

Does it support Qualcomm cVc technology?

Yes, Rockerz 109 has Qualcommā€™s Clear Voice Capture (cVc) technology for noise cancelling and enhancing selective listening.

Can I swim with the Rockerz 109?

Rockerz 109 is IPX5 certified, meaning it can withstand a low-pressure water jet spray, but it cannot withstand being submerged in water. Itā€™s recommended not to use it during swimming sessions.

Need Help? Contact boAt Support

šŸ“ž Call Us

022-6918-1920

9 AM ā€“ 7 PM IST (Mon-Sat)

Closed on Sundays and National holidays

šŸ’¬ WhatsApp Chat

Get instant support via WhatsApp for quick queries and troubleshooting assistance

Launch WhatsApp Chat

Note: This guide is based on official boAt support documentation. For the most up-to-date information, visit boAt Support

Recent Posts

boAt Rockerz 378

boAt Rockerz 378 Complete FAQ & Troubleshooting Guide for Gaming Wireless Neckband Spatial Bionic Sound (THXĀ® Tuned) | Dedicated Quick…

20 minutes ago

boAt Rockerz Trinity

boAt Rockerz Trinity Complete FAQ & Troubleshooting Guide 150-Hour Playback | Crystal Bionic Sound (HiFiĀ® DSP) | 65ms BEAST™ Mode…

23 minutes ago

boAt Rockerz 255 Touch

boAt Rockerz 255 Touch Complete FAQ & Troubleshooting Guide for Full Touch Swipe Neckband Full Touch Swipe Controls | Spatial…

28 minutes ago

boAt Nirvana 525 Anc

boAt Nirvana 525 ANC Complete FAQ & Troubleshooting Guide for World's First Dolby-Powered Neckband Dolby Audio | Ā±42 dB Hybrid…

33 minutes ago

boAt Rockerz Rockid Rush

boAt Rockerz Rockid Rush Complete FAQ & Troubleshooting Guide for Kids Wireless Headphones 85 dB Safe Sound Limit | 30mm…

35 minutes ago

boAt Nirvana Eutopia – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Nirvana Eutopia with 3D Spatial Audio, Head-Tracked Spatial Mode, BEAST™ Mode, ASAP™ Charge, specifications, troubleshooting, and…

50 minutes ago