Categories: Boat Support

boAt Rockerz 112 – Complete Support Guide with Specifications & FAQs

šŸ“„ Original Source: boAt Official Support ā€“ Rockerz 112

boAt Rockerz 112

Neckband Earphones with ENxā„¢ Technology & 60ms BEASTā„¢ Mode

Immersive Everyday Audio

Rockerz 112 is designed for immersive sound, seamless connectivity, and long-lasting performance, packing in cutting-edge features whether youā€™re gaming, working out, or vibing to your favorite tracks:

  • 10mm Drivers ā€“ boAt Signature Sound
  • ENxā„¢ Technology ā€“ Clear voice calls
  • BEASTā„¢ Mode ā€“ 60ms low latency for casual gaming
  • ASAPā„¢ Charge ā€“ 10 min charge = 10 hrs playtime
  • Dual Pairing ā€“ Connect two devices simultaneously
  • Bluetooth 5.3 ā€“ Stable 10m connection
  • IPX5 Water Resistant ā€“ Built for durability

Key Features at a Glance

šŸŽµ 40 Hours Playtime

Talk time and music playtime at 60% volume

āš” ASAPā„¢ Charge

10 mins charging = 10 hrs playtime

šŸŽ® Gaming Ready

60ms low latency BEASTā„¢ Mode for gaming

šŸ”— Dual Pairing

Connect two devices at the same time

Full Specifications

Specification Details
Type Bluetooth Wireless Neckband Earphones
Bluetooth Version V5.3
Driver Size 10mm Ɨ 2
Music Playtime Up to 40 Hours (at 60% volume)
Talk Time Up to 40 Hours
Battery Capacity 210mAh
Charging Time Up to 50 Minutes
Charging Interface USB Type-C
Frequency Response 20Hz ā€“ 20kHz
Operating Range 10 Meters
Water Resistance IPX5
Dual Pairing Yes
BEASTā„¢ Mode Yes; 60ms Low Latency
ENxā„¢ Technology Yes
ASAPā„¢ Charge Yes; 10 mins charge = 10 hrs playtime

Technology & Features

ENxā„¢ Technology

Environmental noise cancellation technology that helps reduce background noise for clearer voice calls.

BEASTā„¢ Mode (Low Latency)

Rockerz 112 supports 60ms low latency for entertainment and casual gaming, reducing audio lag. Itā€™s not designed for professional gaming equipment needs.

ASAPā„¢ Charge Technology

10 Minutes = 10 Hours of Playtime

boAtā€™s patented fast-charging technology provides exceptional battery efficiency (may vary by conditions). Use a Type-C 5V/2A adapter for effective ASAPā„¢ Charge performance, and follow the charging norms in your user manual.

Dual Pairing

Connect Rockerz 112 to two devices at once. Pair to the first device, turn off both the earphones and that deviceā€™s Bluetooth, pair to the second device, then re-enable the first deviceā€™s Bluetooth to have both stay connected.

Multifunction Button (MFB) Controls

Action Function
Press & hold MFB (3 sec) Power ON / Enter pairing mode
Press & hold MFB (5 sec) Power OFF
Press & hold Volume Up + Volume Down together (5 sec) Factory Reset / Clear paired devices
Short press MFB once Play/Pause, Answer/End call
Press MFB twice Reject call (during ring)
Long press MFB (1.5 sec) Activate Voice Assistant (Google Assistant/Siri)
Press & hold Volume Up (2 sec) Next Track
Press & hold Volume Down (2 sec) Previous Track
Short press Volume +/- Adjust Volume

Note: The neckband automatically turns off if no pairing is established within 5 minutes of entering pairing mode.

Pairing & Connectivity

Initial Pairing

  1. Press & hold the MFB for 3 seconds to power on and enter pairing mode
  2. The blue and red LEDs flash alternately to indicate pairing mode
  3. Open Bluetooth settings on your device and search for ā€˜Rockerz 112ā€™
  4. Select the device from the list; enter passcode 0000 if prompted
  5. Once connected, the blue LED remains solid for 3 seconds to confirm pairing

LED Indicator Guide

  • Pairing mode: Red and blue LEDs blink alternately
  • Pairing successful: Blue LED remains solid for 3 seconds
  • Charging: Red LED remains solid ON
  • Fully charged: Red LED turns OFF
  • Factory reset successful: Red and blue LEDs flash alternately for 1 second

Charging & Battery

How to Charge

  • Plug the provided USB Type-C cable into the earphones and connect the other end to a laptop, wall adapter, or power bank
  • Use a 5V/2A wall adapter and a standard cable with 35 strands @ 0.10mm diameter/strand
  • Full charge takes up to 50 minutes
  • Red LED remains solid while charging and turns off once complete
  • Note: The earphones cannot be used or switched on while charging

Troubleshooting Guide

Bluetooth Connectivity Issues

Earphones not connecting via Bluetooth
  1. Ensure Bluetooth is ON and the earphones are in pairing mode (alternating red/blue LED flashes)
  2. Confirm the device is within 10m range with no obstructions
  3. If prompted for a passcode, enter 0000
  4. Clear the pairing list with a factory reset
  5. Check for software issues on your phone; try forgetting the device or updating mobile software
One side not working or disconnecting frequently
  1. Clear ā€œRockerz 112ā€ from your deviceā€™s pairing history first
  2. Press and hold Volume Up (+) and Volume Down (-) simultaneously for 5 seconds to clear paired device history
  3. Red and blue LEDs flash alternately for 1 second confirming a successful reset
Dual pairing not working
  1. Pair to the first phone as per usual procedure, then switch off both the earphones and the first phoneā€™s Bluetooth
  2. Switch the earphones back on and pair to the second phone
  3. Switch the first phoneā€™s Bluetooth back on ā€“ the earphones should reconnect to both
  4. Try dual pairing with other devices to isolate the issue

Charging Issues

Earphones not charging
  1. Test the charging cable with another device
  2. Use only a 5V/2A wall adapter
  3. Check for dirt or debris in the charging port and clean with a cotton swab
  4. Verify the battery wasnā€™t tampered with or exposed to electrical damage

Sound Issues

Sound is distorted, low volume, low bass, or muffled
  1. Set your phoneā€™s equalizer to normal/default/none/0 (see phone-specific EQ paths below)
  2. Perform a factory reset
  3. Clean ear wax buildup and gently blow dry from a distance if water droplets are present (avoid overheating)
Volume changes automatically
  1. Check equalizer settings on the connected device
  2. Test with a different media player or device to isolate the issue

Power & Control Issues

Device doesnā€™t power on
  1. Confirm the device has been fully charged (solid red LED turns off when complete)
  2. Test the charging wire with another device
  3. Verify the charger voltage is 5V/2A
  4. Clean the charging port if clogged with dirt
  5. Check for mishandling, broken wires, or extreme heat exposure
Built-in controls not working
  1. Unpair/Forget the device and pair again
  2. Test controls when connected to a different device
  3. Verify the media player supports Bluetooth controls
  4. Check for physical damage or hazard exposure
Voice assistant doesnā€™t wake up
  1. Check that Google Assistant or Siri is enabled on your paired device
  2. Long press the MFB for 1.5 seconds and release; this may be restricted by default on some devices

Microphone Issues

Voice is muffled during calls / microphone not working
  1. Restart the device
  2. Perform a factory reset
  3. Ensure no objects obstruct the connection; move closer to your device
  4. Check the microphone hole for dirt or earwax and clean gently

Phone-Specific EQ Settings

Phone Brand EQ Path
Vivo i Music > Audio effect > Deep space sound effects > Equalizer
Xiaomi Settings > Sound & vibration > Sound effects > Graphic equalizer
Samsung Settings > Sound quality and effects > Equalizer
Realme Settings > Sound > Equalizer (varies by UI version)
Oppo Settings > Sound & vibration > Equalizer
Apple Settings > Music > EQ
Motorola Settings > Sound > Audio effects
Poco Settings > Sound & Vibration > Graphic Equalizer
OnePlus Settings > Sound Quality & Effects > Audio Tuner

Frequently Asked Questions

How long is the battery life?

Rockerz 112 offers up to 40 hours of playtime and talk time at approximately 60% volume. Full charging takes up to 50 minutes.

What is ASAPā„¢ Charge?

boAtā€™s patented fast-charging technology that provides up to 10 hours of playback from just 10 minutes of charging (may vary by conditions). Use a Type-C 5V/2A adapter for best results.

Is it good for gaming?

Rockerz 112 supports 60ms low latency via BEASTā„¢ Mode, suitable for entertainment and casual gaming, but itā€™s not intended for professional gaming equipment needs.

Does it have Environmental Noise Cancelling?

Yes, Rockerz 112 includes ENxā„¢ technology for clearer voice calls.

Can I connect two devices at the same time?

Yes, Rockerz 112 supports dual pairing, letting you connect two devices simultaneously.

Can I use any USB Type-C cable for ASAPā„¢ Charge?

For ASAPā„¢ Charge to work effectively, use a Type-C adapter with 5V/2A specification.

Can I swim with the Rockerz 112?

The Rockerz 112 earphones are IPX5 certified, meaning they can withstand a low-pressure water jet spray but cannot withstand being submerged in water. Itā€™s recommended not to use them during swimming sessions.

Need Help? Contact boAt Support

šŸ“ž Call Us

022-6918-1920

9 AM ā€“ 7 PM IST (Mon-Sat)

Closed on Sundays and National holidays

šŸ’¬ WhatsApp Chat

Get instant support via WhatsApp for quick queries and troubleshooting assistance

Launch WhatsApp Chat

Note: This guide is based on official boAt support documentation. For the most up-to-date information, visit boAt Support

Recent Posts

boAt Rockerz 261 Pro – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz 261 Pro with Air Conduction Technology, AI-ENx™, ASAP™ Charge, specifications, troubleshooting, and complete setup instructions.

2 hours ago

boAt Rockerz Arc Plus – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz Arc Plus with Spatial Audio, boAt Adaptive EQ, AI-ENx™ technology, BEAST™ Mode, ASAP™ Charge, specifications,…

2 hours ago

boAt Rockerz 150 Pro – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz 150 Pro with 150 hours playtime, BEAST™ Mode, ASAP™ Charge, Dual Pairing, specifications, troubleshooting, and…

2 hours ago

boAt Rockerz 370 Pro – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz 370 Pro with HD Sound, ENx™ technology, BEAST™ Mode, ASAP™ Charge, specifications, troubleshooting, and complete…

2 hours ago

boAt Rockerz 400 Pro – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz 400 Pro with HD Sound, ENx™ technology, BEAST™ Mode, specifications, troubleshooting, and complete setup instructions.

2 hours ago

boAt Rockerz 375 – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz 375 with BEAST™ Mode, EQ Sound Modes, specifications, troubleshooting, and complete setup instructions.

2 hours ago