Categories: Boat Support

boAt Rockerz 80 Pro – Complete Support Guide with Specifications & FAQs

📄 Original Source: boAt Official Support – Rockerz 80 Pro

boAt Rockerz 80 Pro

Neckband Earphones with 80 Hours Playtime & ENx™ Technology

Built to Impress, Built to Last

Rockerz 80 Pro is the ultimate wireless neckband designed to elevate your audio experience, with clear work calls via ENx™ Technology and the ability to switch between calls on your laptop and music on your phone:

  • 10mm x 2 Drivers – boAt Signature Sound
  • ENx™ Technology – Clear voice calls
  • BEAST Mode – 60ms low latency for casual gaming
  • ASAP™ Charge – Fast top-up charging
  • Dual Pairing – Connect two devices simultaneously
  • Bluetooth 5.2 – Stable 10m connection
  • IPX4 Water Resistant – Built for durability

Key Features at a Glance

🎵 80 Hours Playtime

Music playtime and talk time per charge

⚡ ASAP™ Charge

Fast charging for quick top-ups

🎮 60ms BEAST Mode

Low latency mode for casual gaming

🔗 Dual Pairing

Connect two devices at the same time

Full Specifications

Specification Details
Type Bluetooth Wireless Neckband Earphones
Bluetooth Version V5.2
Driver Size 10mm × 2
Music Playtime Up to 80 Hours per charge
Talk Time Up to 80 Hours per charge
Battery Capacity 440mAh
Charging Time About 1 Hour
Charging Interface USB Type-C
Frequency Response 20Hz – 20kHz
Transmission Range 10 Meters
Water Resistance IPX4
Latency 60ms (BEAST Mode)
Dual Pairing Yes
cVc Technology Yes

Technology & Features

ENx™ Technology

Environmental noise cancellation technology that helps reduce background noise for clearer voice calls – ideal for work calls.

BEAST Mode (Low Latency)

Rockerz 80 Pro features 60ms low latency for entertainment needs. It’s suitable for casual gaming, but not intended for professional gaming equipment needs. Short press the dedicated BEAST mode button to activate or deactivate.

ASAP™ Charge Technology

10 Minutes = 10 Hours of Playback

boAt’s patented fast-charging technology provides exceptional battery efficiency (may vary by conditions). Use a Type-C 5V/2A adapter for ASAP™ Charge to work effectively.

Dual Pairing

Connect Rockerz 80 Pro to your first device, then switch off both the earphones and that device’s Bluetooth. Connect to your second device, then switch the first device’s Bluetooth back on – the earphones will connect to both. Switch effortlessly between work calls on your laptop and music on your phone.

cVc Noise Cancellation

Rockerz 80 Pro includes Qualcomm’s Clear Voice Capture (cVc) technology, used for noise cancelling and enhancing selective listening.

Button Controls

Action Function
Separate the left and right earbuds Power ON / Enter pairing mode (blue LED flashes)
Unite the left and right earbuds Power OFF
Press & hold MFB + Volume Down together (5 sec) Factory Reset / Clear paired devices (purple LED flashes 1 sec)
Short press MFB once Play/Pause, Answer/End call
Double press MFB Reject call (during ring) / Activate Voice Assistant
Short press BEAST mode button Toggle BEAST Mode (low latency) on/off
Press & hold Volume Up (2 sec) Next Track
Press & hold Volume Down (2 sec) Previous Track
Short press Volume +/- Adjust Volume

Pairing & Connectivity

Initial Pairing

  1. When switched off, separate the left and right earbuds to power on and enter pairing mode
  2. The blue and red LEDs flash alternately to indicate pairing mode
  3. Open Bluetooth settings on your device and search for ‘Rockerz 80 Pro’
  4. Select the device from the list; enter passcode 0000 or 1234 if prompted
  5. Once connected, the blue LED flashes once every 5 seconds to confirm pairing

Note: The neckband automatically turns off if no connection is established within 5 minutes of entering pairing mode.

Dual Pairing (Connect 2 Devices)

  1. Connect the earphones to your first device, then turn off both the earphones and the first device’s Bluetooth
  2. Turn on the earphones and connect to your second device, then turn on the first device’s Bluetooth
  3. The earphones will connect to both devices; if not, connect the first device manually once again to activate dual pairing

LED Indicator Guide

  • Power ON / Pairing mode: Blue and red LEDs flash alternately
  • Connected: Blue LED flashes once every 5 seconds
  • Charging: Solid red LED
  • Fully charged: Red LED turns off
  • Low battery (below 20%): Red LED flashes quickly with a “Low Battery” prompt every 10 minutes
  • Factory reset successful: Purple LED flashes for 1 second

Charging & Battery

How to Charge

  • Plug the USB Type-C cable into the neckband and connect the other end to a computer or wall adapter
  • Use a 5V/2A wall adapter
  • Full charge takes about 1 hour
  • Solid red LED indicates charging; the LED turns off once fully charged
  • Note: The neckband cannot be turned on while charging

Troubleshooting Guide

Bluetooth Connectivity Issues

Neckband not connecting via Bluetooth
  1. Check the earphones are in pairing mode (alternating red/blue LED flashes) by separating the earbuds while switched off
  2. Clear the pairing list by holding the Volume Up and Volume Down buttons together for 5 seconds in standby mode
  3. Confirm the device is within 10m range with no obstructions
  4. Check the connecting device supports Bluetooth connections
  5. If prompted for a passcode, try 0000 or 1234
  6. Check for software issues on your phone; try forgetting the device or updating mobile software
Dual pairing not working
  1. Pair to the first phone as per usual procedure, then switch off both the earphones and the first phone’s Bluetooth
  2. Switch on the earphones and pair to the second phone, then switch the first phone’s Bluetooth back on
  3. The earphones should reconnect to the first phone with both phones paired
  4. Try dual pairing with other devices to isolate the issue
One side not working or disconnecting frequently
  1. Restart the device
  2. Try a factory reset
  3. Check if the same issue happens on different devices and media players
  4. Clear obstructions and move the device closer to the earphones

Charging Issues

Neckband not charging or battery life is low
  1. Test the charging cable with another device
  2. Use only a 5V/2A wall adapter
  3. Check the charging is done until the red light turns off
  4. Verify the battery wasn’t tampered with or exposed to electrical damage
  5. Check for dirt or debris in the charging port and clean with a cotton swab
  6. Confirm the adapter and cable support fast charging

Sound Issues

Sound is distorted, low volume, low bass, or muffled
  1. Set your phone’s equalizer to normal/default/none/zero (see phone-specific EQ paths below)
  2. Reset the device or clear the paired devices list
  3. Ensure there’s no obstruction and you’re within the 10m Bluetooth range
  4. Clean ear wax buildup with a cotton swab and alcohol, then gently blow dry from a distance
Volume changes automatically
  1. Check equalizer settings on the connected device
  2. Reset the device or clear the paired devices list

Power & Control Issues

Neckband doesn’t turn on
  1. Confirm the device has been fully charged first, until the red light turns off
  2. Use only 5V/2A chargers
  3. Check for mishandling, broken wires, or exposure to direct sunlight or fire hazards
Built-in controls not working
  1. Test whether controls work while connected to a different device
  2. Forget the device and pair it again
  3. Verify the media player supports these controls
  4. Check for physical damage or hazard exposure
Voice assistant doesn’t wake up
  1. Check that Google Assistant or Siri is enabled on your paired device
  2. Double press the MFB to activate; this may be restricted by default on some devices

Microphone Issues

Microphone not working
  1. Reset your Rockerz 80 Pro
  2. Ensure the microphone is not being blocked by any particles
  3. Hold the microphone at an adequate distance to pick up your voice
  4. Test by recording your voice on a voice recorder to confirm the mic is working
  5. Check it wasn’t exposed to hazards like direct sunlight, fire, or water beyond its resistance rating

Phone-Specific EQ Settings

Phone Brand EQ Path
Vivo i Music > Audio effect > Deep space sound effects > Equalizer
Xiaomi Settings > Sound & vibration > Sound effects > Graphic equalizer
Samsung Settings > Sound quality and effects > Equalizer
Realme Settings > Sound > Equalizer (varies by UI version)
Oppo Settings > Sound & vibration > Equalizer
Apple Settings > Music > EQ
Motorola Settings > Sound > Audio effects
Poco Settings > Sound & Vibration > Graphic Equalizer
OnePlus Settings > Sound Quality & Effects > Audio Tuner

Frequently Asked Questions

How long is the battery life?

Rockerz 80 Pro offers up to 80 hours of music playtime and talk time per charge. Full charging takes about 1 hour.

What is ASAP™ Charge?

boAt’s patented fast-charging technology that provides up to 10 hours of playback from just 10 minutes of charging (may vary by conditions). Use a Type-C 5V/2A adapter for ASAP™ Charge to work effectively.

Is it good for gaming?

Rockerz 80 Pro features 60ms low latency BEAST Mode, suitable for entertainment and casual gaming, but it’s not intended for professional gaming equipment needs.

Does it have Environmental Noise Cancelling?

Yes, Rockerz 80 Pro includes ENx™ technology for clearer voice calls, ideal for work calls.

Can I connect two devices at the same time?

Yes, Rockerz 80 Pro supports dual pairing, letting you switch between work calls on your laptop and music on your phone.

Does it support Qualcomm cVc technology?

Yes, Rockerz 80 Pro has Qualcomm’s Clear Voice Capture (cVc) technology for noise cancelling and enhancing selective listening.

Can I swim with the Rockerz 80 Pro?

Rockerz 80 Pro is IPX4 certified, meaning it can withstand a low-pressure water jet spray, but it cannot withstand being submerged in water. It’s recommended not to use it during swimming sessions.

Need Help? Contact boAt Support

📞 Call Us

022-6918-1920

9 AM – 7 PM IST (Mon-Sat)

Closed on Sundays and National holidays

💬 WhatsApp Chat

Get instant support via WhatsApp for quick queries and troubleshooting assistance

Launch WhatsApp Chat

Note: This guide is based on official boAt support documentation. For the most up-to-date information, visit boAt Support

Recent Posts

boAt Rockerz 378

boAt Rockerz 378 Complete FAQ & Troubleshooting Guide for Gaming Wireless Neckband Spatial Bionic Sound (THXÂŽ Tuned) | Dedicated Quick…

25 minutes ago

boAt Rockerz Trinity

boAt Rockerz Trinity Complete FAQ & Troubleshooting Guide 150-Hour Playback | Crystal Bionic Sound (HiFiÂŽ DSP) | 65ms BEAST™ Mode…

27 minutes ago

boAt Rockerz 255 Touch

boAt Rockerz 255 Touch Complete FAQ & Troubleshooting Guide for Full Touch Swipe Neckband Full Touch Swipe Controls | Spatial…

32 minutes ago

boAt Nirvana 525 Anc

boAt Nirvana 525 ANC Complete FAQ & Troubleshooting Guide for World's First Dolby-Powered Neckband Dolby Audio | Âą42 dB Hybrid…

37 minutes ago

boAt Rockerz Rockid Rush

boAt Rockerz Rockid Rush Complete FAQ & Troubleshooting Guide for Kids Wireless Headphones 85 dB Safe Sound Limit | 30mm…

39 minutes ago

boAt Nirvana Eutopia – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Nirvana Eutopia with 3D Spatial Audio, Head-Tracked Spatial Mode, BEAST™ Mode, ASAP™ Charge, specifications, troubleshooting, and…

55 minutes ago