Categories: Boat Support

boAt Rockerz Enticer – Complete Support Guide with Specifications & FAQs

šŸ“„ Original Source: boAt Official Support ā€“ Rockerz Enticer

boAt Rockerz Enticer

Neckband Earphones with Graphene Drivers & Quick Switch

Immersive Sound, Effortless Switching

Rockerz Enticer surrounds you with boAt Immersive Sound and 10mm Graphene Drivers, with a Quick Switch button to move from music on your phone to work calls on your laptop in a blink:

  • 10mm x 2 Graphene Drivers ā€“ boAt Immersive Sound
  • Quick Switch ā€“ Instantly switch between two connected devices
  • BEAST Mode ā€“ 60ms low latency for casual gaming
  • ASAPā„¢ Charge ā€“ Fast top-up charging
  • Bluetooth 5.2 ā€“ Stable 10m connection
  • IPX4 Water Resistant ā€“ Built for durability

Key Features at a Glance

šŸŽµ 30 Hours Playtime

Music playtime and talk time per charge

āš” ASAPā„¢ Charge

Fast charging for quick top-ups

šŸŽ® 60ms BEAST Mode

Low latency mode for casual gaming

šŸ”€ Quick Switch

Toggle between two connected devices

Full Specifications

Specification Details
Type Bluetooth Wireless Neckband Earphones
Bluetooth Version V5.2
Driver Size 10mm Ɨ 2 (Graphene)
Music Playtime Up to 30 Hours per charge
Talk Time Up to 30 Hours per charge
Battery Capacity 220mAh
Charging Time About 1 Hour
Charging Interface USB Type-C
Frequency Response 20Hz ā€“ 20kHz
Transmission Range 10 Meters
Water Resistance IPX4
BEAST Mode Yes; 60ms Latency
Quick Switch Yes
aptX Codec Yes
cVc Technology Yes

Technology & Features

10mm Graphene Drivers & boAt Immersive Sound

10mm Graphene drivers deliver boAt Immersive Sound, making your playlist sound as real as it gets.

BEAST Mode (Low Latency)

Rockerz Enticer features 60ms low latency for entertainment needs. Itā€™s suitable for casual gaming, but not intended for professional gaming equipment needs. Short press the Quick-Switch button to activate or deactivate BEASTā„¢ mode.

ASAPā„¢ Charge Technology

10 Minutes = 10 Hours of Playback

boAtā€™s patented fast-charging technology provides exceptional battery efficiency (may vary by conditions). Use a Type-C 5V/2A adapter for ASAPā„¢ Charge to work effectively.

Quick Switch

Switch between two connected devices by double pressing the Quick-Switch button. To set up: connect the earphones to your first device, then switch off both the earphones and the first deviceā€™s Bluetooth. Turn the earphones back on and connect to your second device, then switch the first deviceā€™s Bluetooth back on ā€“ the earphones will connect to both. Double press the Quick-Switch button anytime to move from music on your phone to work calls on your laptop.

cVc Noise Cancellation & aptX

Rockerz Enticer includes Qualcommā€™s Clear Voice Capture (cVc) technology for noise cancelling and enhanced selective listening, and supports the Qualcomm aptX codec (requires aptX support on the connected media device too).

Button Controls

Action Function
Long press MFB (3 sec) from switched off Power ON (blue LED flashes 1 sec, voice tone confirms)
Continue holding MFB to 5 sec from switched off Power ON + Enter pairing mode (red & blue LEDs flash alternately)
Press & hold MFB (5 sec) while powered on Power OFF (red LED flashes once, voice tone confirms)
Press & hold MFB + Volume Down together (5 sec) Factory Reset / Clear paired devices
Short press MFB once Play/Pause, Answer/End call
Double press MFB Reject call (during ring) / Activate Voice Assistant
Short press Quick-Switch button Toggle BEASTā„¢ Mode (low latency) on/off
Double press Quick-Switch button Switch between two connected devices
Press & hold Volume Up (2 sec) Next Track
Press & hold Volume Down (2 sec) Previous Track
Short press Volume +/- Adjust Volume

Pairing & Connectivity

Initial Pairing

  1. When switched off, press & hold the MFB for 5 seconds to power on and enter pairing mode
  2. The blue and red LEDs flash alternately to indicate pairing mode
  3. Open Bluetooth settings on your device and search for ā€˜Rockerz Enticerā€™
  4. Select the device from the list; enter passcode 0000 or 1234 if prompted
  5. Once connected, the blue LED flashes once every 5 seconds to confirm pairing

Note: The neckband automatically turns off if no connection is established within 5 minutes of entering pairing mode.

Quick Switch (Connect 2 Devices)

  1. Connect the earphones to your first device, then turn off both the earphones and the first deviceā€™s Bluetooth
  2. Turn on the earphones and connect to your second device, then turn on the first deviceā€™s Bluetooth
  3. The earphones will connect to both devices; if not, connect the first device manually once again
  4. Once set up, double press the Quick-Switch button anytime to toggle between the two connected devices

LED Indicator Guide

  • Power ON: Blue LED flashes for 1 second
  • Pairing mode: Red and blue LEDs flash alternately
  • Connected: Blue LED flashes once every 5 seconds
  • Power OFF: Red LED flashes once
  • Charging: Solid red LED
  • Fully charged: Red LED turns off
  • Low battery (below 20%): Red LED flashes quickly with a ā€œLow Batteryā€ prompt every few minutes
  • Factory reset successful: Red and blue LEDs stay lit for 1 second, then resume blinking

Charging & Battery

How to Charge

  • Plug the USB Type-C cable into the neckband and connect the other end to a computer or wall adapter
  • Use a 5V/2A wall adapter
  • Full charge takes about 1 hour
  • Solid red LED indicates charging; the LED turns off once fully charged
  • Note: The neckband cannot be turned on while charging

Troubleshooting Guide

Bluetooth Connectivity Issues

Neckband not connecting via Bluetooth
  1. Check the earphones are in pairing mode (alternating red/blue LED flashes) by holding the MFB for 5 seconds
  2. Clear the pairing list by holding the MFB and Volume Down button together for 5 seconds in standby mode
  3. Confirm the device is within 10m range with no obstructions
  4. Check the connecting device supports Bluetooth connections
  5. If prompted for a passcode, try 0000 or 1234
  6. Check for software issues on your phone; try forgetting the device or updating mobile software
Quick-Switch not working between two phones
  1. Pair to the first phone as per usual procedure, then switch off both the earphones and the first phone
  2. Switch the earphones back on and enter pairing mode, then enable Bluetooth on the second phone and pair to it
  3. Switch the earphones off once more, then switch on normally (short press until white light comes on) ā€“ they should reconnect to the second phone automatically
  4. Find ā€œRockerz Enticerā€ in the first phoneā€™s Bluetooth settings and pair to it as well ā€“ both phones should now be paired
  5. Try Quick-Switch with other devices to isolate the issue
One side not working or disconnecting frequently
  1. Restart the device
  2. Try a factory reset
  3. Check if the same issue happens on different devices and media players
  4. Clear obstructions and move the device closer to the earphones

Charging Issues

Neckband not charging or battery life is low
  1. Test the charging cable with another device
  2. Use only a 5V/2A wall adapter
  3. Check the charging is done until the red light turns off
  4. Verify the battery wasnā€™t tampered with or exposed to electrical damage
  5. Check for dirt or debris in the charging port and clean with a cotton swab
  6. Confirm the adapter and cable support fast charging

Sound Issues

Sound is distorted, low volume, low bass, or muffled
  1. Set your phoneā€™s equalizer to normal/default/none/zero (see phone-specific EQ paths below)
  2. Reset the device or clear the paired devices list
  3. Ensure thereā€™s no obstruction and youā€™re within the 10m Bluetooth range
  4. Clean ear wax buildup with a cotton swab and alcohol, then gently blow dry from a distance
Volume changes automatically
  1. Check equalizer settings on the connected device
  2. Reset the device or clear the paired devices list

Power & Control Issues

Neckband doesnā€™t turn on
  1. Confirm the device has been fully charged first, until the red light turns off
  2. Use only 5V/2A chargers
  3. Check for mishandling, broken wires, or exposure to direct sunlight or fire hazards
Built-in controls not working
  1. Test whether controls work while connected to a different device
  2. Forget the device and pair it again
  3. Verify the media player supports these controls
  4. Check for physical damage or hazard exposure
Voice assistant doesnā€™t wake up
  1. Check that Google Assistant or Siri is enabled on your paired device
  2. Double press the MFB to activate; this may be restricted by default on some devices

Microphone Issues

Microphone not working
  1. Reset your Rockerz Enticer
  2. Ensure the microphone is not being blocked by any particles
  3. Hold the microphone at an adequate distance to pick up your voice
  4. Test by recording your voice on a voice recorder to confirm the mic is working
  5. Check it wasnā€™t exposed to hazards like direct sunlight, fire, or water beyond its resistance rating

Phone-Specific EQ Settings

Phone Brand EQ Path
Vivo i Music > Audio effect > Deep space sound effects > Equalizer
Xiaomi Settings > Sound & vibration > Sound effects > Graphic equalizer
Samsung Settings > Sound quality and effects > Equalizer
Realme Settings > Sound > Equalizer (varies by UI version)
Oppo Settings > Sound & vibration > Equalizer
Apple Settings > Music > EQ
Motorola Settings > Sound > Audio effects
Poco Settings > Sound & Vibration > Graphic Equalizer
OnePlus Settings > Sound Quality & Effects > Audio Tuner

Frequently Asked Questions

How long is the battery life?

Rockerz Enticer offers up to 30 hours of music playtime and talk time per charge. Full charging takes about 1 hour.

What is ASAPā„¢ Charge?

boAtā€™s patented fast-charging technology that provides up to 10 hours of playback from just 10 minutes of charging (may vary by conditions). Use a Type-C 5V/2A adapter for ASAPā„¢ Charge to work effectively.

Is it good for gaming?

Rockerz Enticer features 60ms low latency BEAST Mode, suitable for entertainment and casual gaming, but itā€™s not intended for professional gaming equipment needs.

What is Quick Switch and how do I use it?

Quick Switch lets you toggle between two connected devices by double pressing the Quick-Switch button ā€“ handy for moving from music on your phone to work calls on your laptop. Set it up by pairing to your first device, switching both off, pairing to your second device, then switching the first deviceā€™s Bluetooth back on.

Does it support the aptX codec?

Yes, Rockerz Enticer supports the Qualcomm aptX codec, but the connected media device must also support aptX for it to work.

Does it support Qualcomm cVc technology?

Yes, Rockerz Enticer has Qualcommā€™s Clear Voice Capture (cVc) technology for noise cancelling and enhancing selective listening.

Can I swim with the Rockerz Enticer?

Rockerz Enticer is IPX4 certified, meaning it can withstand a low-pressure water jet spray, but it cannot withstand being submerged in water. Itā€™s recommended not to use it during swimming sessions.

Need Help? Contact boAt Support

šŸ“ž Call Us

022-6918-1920

9 AM ā€“ 7 PM IST (Mon-Sat)

Closed on Sundays and National holidays

šŸ’¬ WhatsApp Chat

Get instant support via WhatsApp for quick queries and troubleshooting assistance

Launch WhatsApp Chat

Note: This guide is based on official boAt support documentation. For the most up-to-date information, visit boAt Support

Recent Posts

boAt Rockerz 378

boAt Rockerz 378 Complete FAQ & Troubleshooting Guide for Gaming Wireless Neckband Spatial Bionic Sound (THXĀ® Tuned) | Dedicated Quick…

26 minutes ago

boAt Rockerz Trinity

boAt Rockerz Trinity Complete FAQ & Troubleshooting Guide 150-Hour Playback | Crystal Bionic Sound (HiFiĀ® DSP) | 65ms BEAST™ Mode…

28 minutes ago

boAt Rockerz 255 Touch

boAt Rockerz 255 Touch Complete FAQ & Troubleshooting Guide for Full Touch Swipe Neckband Full Touch Swipe Controls | Spatial…

33 minutes ago

boAt Nirvana 525 Anc

boAt Nirvana 525 ANC Complete FAQ & Troubleshooting Guide for World's First Dolby-Powered Neckband Dolby Audio | Ā±42 dB Hybrid…

38 minutes ago

boAt Rockerz Rockid Rush

boAt Rockerz Rockid Rush Complete FAQ & Troubleshooting Guide for Kids Wireless Headphones 85 dB Safe Sound Limit | 30mm…

40 minutes ago

boAt Nirvana Eutopia – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Nirvana Eutopia with 3D Spatial Audio, Head-Tracked Spatial Mode, BEAST™ Mode, ASAP™ Charge, specifications, troubleshooting, and…

56 minutes ago