Categories: Boat Support

boAt Rockerz Plus 550 – Complete Support Guide with Specifications & FAQs

šŸ“„ Original Source: boAt Official Support ā€“ Rockerz Plus 550

boAt Rockerz Plus 550

Over-Ear Headphones with 50mm Drivers, 100 Hours Playtime & Dual Compatibility

Massive Sound, Massive Playtime

Rockerz Plus 550 headphones feature massive 50mm drivers and an over-the-ear design with customizable earcups:

  • 50mm Dynamic Drivers ā€“ Signature boAt Sound
  • 100 Hours Playtime ā€“ Talk time and music playtime
  • Dual Compatibility ā€“ Bluetooth and AUX support
  • Dual Pairing ā€“ Connect two devices simultaneously
  • Physical Noise Isolation ā€“ Over-ear cup design
  • BEASTā„¢ Mode ā€“ Dedicated quick-switch button for low latency
  • Bluetooth 5.3 ā€“ Stable 10m connection

Key Features at a Glance

šŸŽµ 50mm Drivers

Massive drivers for signature boAt Sound

ā±ļø 100 Hours Playtime

800 hours standby time

šŸ”Œ Dual Compatibility

Use via Bluetooth or wired AUX connection

šŸŽ® BEASTā„¢ Mode

Dedicated button for instant low-latency switch

Video Walkthrough

Watch the official setup and troubleshooting walkthrough:

Full Specifications

Specification Details
Type Bluetooth Over-Ear Headphones
Bluetooth Version V5.3
HD Sound Yes
Driver Size 50mm
THD ā‰¤1% at 1kHz
Noise Isolation Yes; Physical
Talk Time Up to 100 Hours
Music Playtime Up to 100 Hours
Standby Time 800 Hours
Mic Sensitivity -42dB
Signal-to-Noise Ratio ā‰„90dB
Transmission Range 10 Meters
Frequency Response 20Hz ā€“ 20kHz
Battery Capacity 800mAh
Charging Time 2.5 Hours
Charging Interface USB Type-C
Charging Voltage 5V

Technology & Features

Dual Compatibility (Bluetooth/AUX)

Rockerz Plus 550 works both wirelessly over Bluetooth and via a wired AUX connection, giving you flexibility whether your source device has Bluetooth or not.

BEASTā„¢ Mode (Low Latency)

Use the dedicated BEAST mode quick-switch button on the headphones to instantly toggle between BEAST Mode (low latency) and regular Music Mode ā€“ a single press switches modes each way.

Physical Noise Isolation

The over-the-ear cup design with customizable earcups provides physical noise isolation from ambient surroundings, complementing the 50mm driverā€™s signature boAt Sound.

Dual Pairing

Connect Rockerz Plus 550 to two devices at once. Pair to the first device, turn off both the headphones and that deviceā€™s Bluetooth, pair to the second device, then re-enable the first deviceā€™s Bluetooth to have both stay connected.

Button Controls

Action Function
Press & hold MFB (3 sec) Power ON / Enter pairing mode (voice tone confirms)
Press & hold Power Button (5 sec) Power OFF
Long press Power ON/OFF + Volume Down (5 sec) Factory Reset / Clear paired devices
Short press MFB once Play/Pause, Answer/End call
Double press MFB Reject call (during ring) / Activate Voice Assistant
Press & hold Volume + (2 sec) Next Track
Press & hold Volume ā€“ (2 sec) Previous Track
Press & hold Volume +/- Adjust Volume
Single press BEAST mode quick-switch button Toggle BEASTā„¢ Mode / Music Mode

Note: The headphones automatically turn off after 5 minutes if no Bluetooth connection is established while in pairing mode.

Pairing & Connectivity

Initial Pairing

  1. When switched off, press & hold the Power ON/OFF button for 3 seconds to power on and enter pairing mode
  2. The blue and red LEDs flash alternately to indicate pairing mode
  3. Open Bluetooth settings on your device and search for ā€˜Rockerz Plus 550ā€™
  4. Select the device from the list; enter passcode 0000 if prompted
  5. Once connected, the LED flashes blue slowly to confirm the connection

Charging & Battery

How to Charge

  • Plug the USB Type-C cable into the headphones and connect the other end to a computer or wall adapter
  • Use a 5V/2A wall adapter
  • Full charge takes approximately 2.5 hours
  • Red LED turns solid blue once charging is complete

Troubleshooting Guide

Connectivity Issues

One side not working or disconnecting frequently
  1. Clear ā€œRockerz Plus 550ā€ from your deviceā€™s pairing history first
  2. Press and hold the MFB and Volume Up (+) button simultaneously for 3 seconds to clear the paired device list
  3. If the issue persists, manually power off and then power on
Dual pairing not working
  1. Pair to the first phone as per usual procedure, then switch off both the headphones and the first phoneā€™s Bluetooth
  2. Switch the headphones back on and pair to the second phone
  3. Switch the first phoneā€™s Bluetooth back on ā€“ the headphones should reconnect to both
  4. Try dual pairing with other devices to isolate the issue

Charging Issues

Not charging or battery life is low
  1. Test the charging cable with another device
  2. Use only a 5V/2A charger
  3. Charge until the red light turns completely blue
  4. Check the battery hasnā€™t been tampered with or exposed to electrical damage
  5. Clean the charging port with a cotton swab if clogged with dirt
  6. Confirm the adapter and cable support fast charging

Sound Issues

Sound is distorted, low volume, low bass, or low quality
  1. Set your phoneā€™s equalizer to Normal/Default/Zero/None
  2. Reset the device or clear the paired devices list
  3. Clean ear wax buildup on the earcups with a cotton swab and alcohol, then air dry
  4. Ensure no obstructions and stay within 10m Bluetooth range
Volume changes automatically
  1. Set the connected deviceā€™s equalizer to Normal/Default/Zero/None
  2. Test with different media players and devices to see if it happens on all or specific devices

Power & Control Issues

Headphones wonā€™t power on
  1. Confirm the device has been fully charged (red light turns blue when complete)
  2. Use only 5V/2A output chargers
  3. Check for mishandling, broken wires, or exposure to sunlight/fire hazards
Built-in controls not working
  1. Test whether controls work while connected to a different device
  2. Unpair/forget the device, reset, and pair again
  3. Verify the media player supports Bluetooth controls
  4. Check for physical damage or hazard exposure
Voice assistant doesnā€™t wake up
  1. Check that Google Assistant or Siri is enabled on your paired device
  2. Double-press the MFB and release; this may be restricted by default on some devices

Microphone Issues

Microphone not working
  1. Reset the headphones
  2. Ensure the microphone isnā€™t blocked by any particles
  3. Hold the microphone at an adequate distance to pick up your voice
  4. Test with a voice recorder to confirm mic function
  5. Check the mic wasnā€™t exposed to sunlight, fire, or liquid beyond its resistance rating

Frequently Asked Questions

How long is the battery life?

Rockerz Plus 550 offers up to 100 hours of talk time and music playtime, with 800 hours of standby time. Full charging takes about 2.5 hours.

Can I use it wired?

Yes, Rockerz Plus 550 supports Dual Compatibility, meaning it can be used via Bluetooth or a wired AUX connection.

How do I switch to BEASTā„¢ Mode?

Single press the dedicated BEAST mode quick-switch button on the headphones to activate low-latency BEAST Mode. Press it again to switch back to regular Music Mode.

Can I connect two devices at the same time?

Yes, Rockerz Plus 550 supports dual pairing, letting you connect two devices simultaneously.

What is the Bluetooth range?

Rockerz Plus 550 has a maximum Bluetooth transmission range of 10 meters under normal conditions with no obstructions.

Does it have noise isolation?

Yes, the over-the-ear cup design with customizable earcups provides physical noise isolation from ambient surroundings.

Need Help? Contact boAt Support

šŸ“ž Call Us

022-6918-1920

9 AM ā€“ 7 PM IST (Mon-Sat)

Closed on Sundays and National holidays

šŸ’¬ WhatsApp Chat

Get instant support via WhatsApp for quick queries and troubleshooting assistance

Launch WhatsApp Chat

Note: This guide is based on official boAt support documentation. For the most up-to-date information, visit boAt Support

Recent Posts

boAt Rockerz Strive – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz Strive with ENx™ technology, BEAST™ Mode, ASAP™ Charge, specifications, troubleshooting, and complete setup instructions.

2 hours ago

boAt Rockerz 210 ANC – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz 210 ANC with 30dB Active Noise Cancellation, 40 hours battery, magnetic buds, specifications, troubleshooting, and…

2 hours ago

boAt Rockerz 301 ANC – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz 301 ANC with 30dB Active Noise Cancellation, 40 hours battery, magnetic buds, specifications, troubleshooting, and…

2 hours ago

boAt Rockerz Zen ANC – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz Zen ANC with 30dB Active Noise Cancellation, 40 hours battery, magnetic buds, specifications, troubleshooting, and…

3 hours ago

boAt Rockerz Plus 550 ANC – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz Plus 550 ANC with 40dB Hybrid ANC, 40mm drivers, 80 hours battery, specifications, video walkthrough,…

3 hours ago

boAt Rockerz Prime 415 – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz Prime 415 with 40mm drivers, boAt 360 Spatial Audio, 120 hours battery, specifications, video walkthrough,…

3 hours ago