TrackIt

Categories: Boat Support

boAt Rockerz Summit – Complete Support Guide with Specifications & FAQs

📄 Original Source: boAt Official Support – Rockerz Summit

boAt Rockerz Summit

Neckband Earphones with ENx™ Technology, BEAST™ Mode & EQ Sound Modes

Immersive Everyday Audio

Rockerz Summit is a high-performance Bluetooth wireless neckband designed for an immersive audio experience:

10mm Drivers – boAt Signature Sound
ENx™ Technology – Clear voice calls
BEAST™ Mode – 60ms low latency for casual gaming
ASAP™ Charge – 10 min charge = 10 hrs playtime
EQ Sound Modes – Signature Sound Mode & Balanced Mode
Dual Pairing – Connect two devices simultaneously
Bluetooth 5.3 – Stable 10m connection
IPX5 Water Resistant – Built for durability

Key Features at a Glance

🎵 30 Hours Playtime

Talk time and music playtime at 60% volume

⚡ ASAP™ Charge

10 mins charging = 10 hrs playtime

🎮 Gaming Ready

60ms low latency BEAST™ Mode for gaming

🔗 Dual Pairing

Connect two devices at the same time

Full Specifications

Specification	Details
Type	Bluetooth Wireless Neckband Earphones
Bluetooth Version	V5.3
Driver Size	10mm × 2
Driver Impedance	32 Ω
Music Playtime	Up to 30 Hours (at 60% volume)
Talk Time	Up to 30 Hours
Battery Capacity	200mAh
Charging Time	Up to 50 Minutes
Charging Interface	USB Type-C
Frequency Response	20Hz – 20kHz
Operating Range	10 Meters
Water Resistance	IPX5
Dual Pairing	Yes
BEAST™ Mode	Yes; 60ms Low Latency
ENx™ Technology	Yes
ASAP™ Charge	Yes; 10 mins charge = 10 hrs playtime

Technology & Features

ENx™ Technology

Environmental noise cancellation technology that helps reduce background noise for clearer voice calls.

BEAST™ Mode (Low Latency)

BEAST™ Mode is a low latency mode infused with virtual 3D sound, built for gaming. A single press of the dedicated BEAST Mode quick-switch button activates 60ms low latency mode with a “BEAST Mode” prompt confirming activation; press the same button again to switch back to normal music mode. It’s ideal for entertainment and casual gaming, but not designed for professional gaming equipment needs.

EQ Sound Modes

Rockerz Summit offers two sound profiles: Signature Sound Mode (boAt’s default bass-centric mode) and Balanced Mode, better suited for podcasts, news, and voice-based media. Short press the dedicated EQ button to switch between the two modes.

ASAP™ Charge Technology

10 Minutes = 10 Hours of Playtime

boAt’s patented fast-charging technology provides exceptional battery efficiency (may vary by conditions). Use a Type-C 5V/2A adapter for effective ASAP™ Charge performance, and follow the charging norms in your user manual.

Dual Pairing

Connect Rockerz Summit to two devices at once. Pair to the first device, turn off both the earphones and that device’s Bluetooth, pair to the second device, then re-enable the first device’s Bluetooth to have both stay connected.

Multifunction Button (MFB) Controls

Action	Function
Press & hold MFB (3 sec)	Power ON / Enter pairing mode
Press & hold MFB (5 sec)	Power OFF
Press & hold Volume Up + Volume Down together (5 sec)	Factory Reset / Clear paired devices
Short press MFB once	Play/Pause, Answer/End call
Press MFB twice	Reject call (during ring)
Press MFB 3 times	Activate Voice Assistant
Press & hold Volume Up (2 sec)	Next Track
Press & hold Volume Down (2 sec)	Previous Track
Short press Volume +/-	Adjust Volume
Single press BEAST Mode quick-switch button	Toggle BEAST™ Mode (low latency) on/off – “BEAST Mode” prompt confirms
Short press EQ button	Switch between Signature Sound Mode and Balanced Mode

Note: The neckband automatically turns off if no pairing is established within 5 minutes of entering pairing mode.

Pairing & Connectivity

Initial Pairing

Press & hold the MFB for 3 seconds to power on and enter pairing mode
The blue and red LEDs flash alternately to indicate pairing mode
Open Bluetooth settings on your device and search for ‘Rockerz Summit’
Select the device from the list; enter passcode 0000 if prompted
Once connected, the blue LED remains solid for 3 seconds to confirm pairing

LED Indicator Guide

Pairing mode: Red and blue LEDs blink alternately
Pairing successful: Blue LED remains solid for 3 seconds
Charging: Red LED remains solid ON
Fully charged: Red LED turns OFF
Factory reset successful: Red and blue LEDs flash alternately for 1 second

Charging & Battery

How to Charge

Plug the provided USB Type-C cable into the earphones and connect the other end to a laptop, wall adapter, or power bank
Use a 5V/2A wall adapter and a standard cable with 35 strands @ 0.10mm diameter/strand
Full charge takes up to 50 minutes
Red LED remains solid while charging and turns off once complete
Note: The earphones cannot be used or switched on while charging

Troubleshooting Guide

Bluetooth Connectivity Issues

Earphones not connecting via Bluetooth

Ensure Bluetooth is ON and the earphones are in pairing mode (alternating red/blue LED flashes)
Confirm the device is within 10m range with no obstructions
If prompted for a passcode, enter 0000
Clear the pairing list with a factory reset
Check for software issues on your phone; try forgetting the device or updating mobile software

One side not working or disconnecting frequently

Clear “Rockerz Summit” from your device’s pairing history first
Press and hold Volume Up (+) and Volume Down (-) simultaneously for 5 seconds to clear paired device history
Red and blue LEDs flash alternately for 1 second confirming a successful reset

Dual pairing not working

Pair to the first phone as per usual procedure, then switch off both the earphones and the first phone’s Bluetooth
Switch the earphones back on and pair to the second phone
Switch the first phone’s Bluetooth back on – the earphones should reconnect to both
Try dual pairing with other devices to isolate the issue

Charging Issues

Earphones not charging

Test the charging cable with another device
Use only a 5V/2A wall adapter
Check for dirt or debris in the charging port and clean with a cotton swab
Verify the battery wasn’t tampered with or exposed to electrical damage

Sound Issues

Sound is distorted, low volume, low bass, or muffled

Set your phone’s equalizer to normal/default/none/0 (see phone-specific EQ paths below)
Perform a factory reset
Clean ear wax buildup and gently blow dry from a distance if water droplets are present (avoid overheating)

Volume changes automatically

Check equalizer settings on the connected device
Test with a different media player or device to isolate the issue

Power & Control Issues

Device doesn’t power on

Confirm the device has been fully charged (solid red LED turns off when complete)
Test the charging wire with another device
Verify the charger voltage is 5V/2A
Clean the charging port if clogged with dirt
Check for mishandling, broken wires, or extreme heat exposure

Built-in controls not working

Unpair/Forget the device and pair again
Test controls when connected to a different device
Verify the media player supports Bluetooth controls
Check for physical damage or hazard exposure

Voice assistant doesn’t wake up

Check that Google Assistant or Siri is enabled on your paired device
Press the MFB 3 times to activate; this may be restricted by default on some devices

Microphone Issues

Voice is muffled during calls / microphone not working

Restart the device
Perform a factory reset
Ensure no objects obstruct the connection; move closer to your device
Check the microphone hole for dirt or earwax and clean gently

Phone-Specific EQ Settings

Phone Brand	EQ Path
Vivo	i Music > Audio effect > Deep space sound effects > Equalizer
Xiaomi	Settings > Sound & vibration > Sound effects > Graphic equalizer
Samsung	Settings > Sound quality and effects > Equalizer
Realme	Settings > Sound > Equalizer (varies by UI version)
Oppo	Settings > Sound & vibration > Equalizer
Apple	Settings > Music > EQ
Motorola	Settings > Sound > Audio effects
Poco	Settings > Sound & Vibration > Graphic Equalizer
OnePlus	Settings > Sound Quality & Effects > Audio Tuner

Frequently Asked Questions

How long is the battery life?

Rockerz Summit offers up to 30 hours of playtime and talk time at approximately 60% volume. Full charging takes up to 50 minutes.

What is ASAP™ Charge?

boAt’s patented fast-charging technology that provides up to 10 hours of playback from just 10 minutes of charging (may vary by conditions). Use a Type-C 5V/2A adapter for best results.

Is it good for gaming?

Rockerz Summit supports 60ms low latency via BEAST™ Mode, suitable for entertainment and casual gaming, but it’s not intended for professional gaming equipment needs.

Does it have Environmental Noise Cancelling?

Yes, Rockerz Summit includes ENx™ technology for clearer voice calls.

Can I connect two devices at the same time?

Yes, Rockerz Summit supports dual pairing, letting you connect two devices simultaneously.

Does it support the aptX codec?

No, Rockerz Summit does not support the Qualcomm aptX codec.

What is Signature Sound Mode and Balanced Mode?

Signature Sound Mode is boAt’s default bass-centric profile, while Balanced Mode is better suited for podcasts, news, and voice-based media. Short press the dedicated EQ button to switch between the two.

How do I activate BEAST™ Mode?

Single press the dedicated BEAST Mode quick-switch button to activate low latency BEAST™ Mode – a “BEAST Mode” prompt confirms activation. Press the same button again to switch back to normal music mode.

Can I use any USB Type-C cable for ASAP™ Charge?

For ASAP™ Charge to work effectively, use a Type-C adapter with 5V/2A specification.

Can I submerge my earphones in water or swim with them?

While the earphones have IPX5 water and sweat resistance, it’s recommended they not be submerged in water directly or used for prolonged periods like swimming or showering, as it may cause damage.