boAt Stone Spinx Pro
Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual
Overview: boAt Stone Spinx Pro
The boAt Stone Spinx Pro is a 20W RMS cylindrical party powerhouse featuring dual 57mm acoustic drivers, a high-capacity 3600mAh battery for up to 9 hours of playback, TWS stereo link (40W total output), multi-mode playback (BT, AUX, TF, USB), and dynamic RGB lighting.
Step-by-Step Setup & Configuration Guide
1. Charging (5V / 2A Input)
Connect the Type-C USB cable to a 5V 2A adapter. Charge for 3.5–4 hours until the red LED turns off.
2. Bluetooth Pairing
Long press the Power button for 3 seconds. The white LED flashes. On your phone, connect to ‘Stone Spinx Pro’.
3. TWS Stereo Sync
Power on two Stone Spinx Pro units. Press and hold the TWS button on one unit to bond them for 40W dual stereo.
4. Mode Switching
Short press the ‘M’ button to toggle between Bluetooth, AUX, TF Card, and USB inputs.
Technical Specifications
| Specification | Details |
|---|---|
| Model Name | boAt Stone Spinx Pro |
| Audio Output Power | 20W RMS (Dual 57mm Full-Range Drivers) |
| Frequency Response | 40Hz – 18kHz |
| Bluetooth Version | v5.0 (Up to 10 Meters Range) |
| Battery Capacity | 3600mAh at 3.7V Lithium-ion |
| Playtime Endurance | Up to 9 Hours Continuous Playback |
| Charging Interface | Type-C USB (Input Voltage: 5V / 2A) |
| Charging Time | Up to 4 Hours Full Charge |
| Multi-Connectivity | Bluetooth v5.0, 3.5mm AUX, TF Card (MP3), USB Drive |
| Special Features | TWS Stereo Link (40W Output), Dynamic RGB Lights |
| Dimensions & Weight | 277 x 91 x 91 mm | Weight: 940 grams |
Exhaustive Frequently Asked Questions & Troubleshooting Manual
Charging & Battery FAQs
Q: How do I charge Stone Spinx Pro?
Connect the Type-C cable to a 5V 2A wall adapter. Full charge takes around 4 hours.
Q: What should I do if the speaker is not charging?
Clean the Type-C port with a dry swab. Ensure you are using a 5V adapter and not a high-voltage laptop brick.
Bluetooth Pairing & TWS FAQs
Q: How do I fix Bluetooth pairing issues?
Double press the ‘M’ button to reset active pairings, restart the speaker, and re-pair.
Q: How does TWS Mode work on Stone Spinx Pro?
Turn on two Spinx Pro units in Bluetooth mode and press the TWS button on one speaker. They will chime and bond into a 40W stereo pair.
Need Official boAt Support?
If you require further technical assistance or warranty support, contact boAt care:
WhatsApp Support: +91-9667700177
Official Support Page: boAt Stone Spinx Pro Support