Complete Setup, Technical Specifications & Exhaustive Troubleshooting Manual
The boAt Watch Lunar Fit combines an ultra-sharp 1.43-inch circular AMOLED display (466×466 pixels), Bluetooth Calling with dedicated dial pad and microphone, 100+ active sports modes, and real-time health telemetry via the boAt Crest App.
Connect Watch Lunar Fit to its magnetic charger and charge for 2 hours using a 5V 2A adapter before first boot.
Download ‘boAt Crest’ from Play Store or App Store, register via OTP, and accept Bluetooth and Location permissions.
Tap ‘Add Device’ → Select ‘Lunar Fit’ → Confirm pairing on the watch screen.
Pair with ‘Lunar Fit_BT’ in phone Bluetooth settings for direct on-wrist calls.
| Specification | Details |
|---|---|
| Model Name | boAt Watch Lunar Fit |
| Display Type | 1.43″ (3.63 cm) Round Super AMOLED Screen (466 x 466 pixels) |
| Bluetooth Calling | Yes (BLE 5.1, On-Wrist Dial Pad, HD Speaker & Mic) |
| Battery Capacity | 280mAh Lithium Polymer |
| Battery Life | Up to 7 Days Normal Usage / 2 Days BT Calling |
| Charging Type | Magnetic Pogo Cable (5V / 2A Input, ~2 Hours) |
| Water Resistance | IP68 Dust, Sweat & Splash Resistance |
| Sports Modes | 100+ Active Sports Tracking Modes |
| Companion App | boAt Crest App (Android 7.0+ & iOS 13.0+) |
Attach the magnetic pogo-pin cable to the rear charging contacts of the watch and connect to a certified 5V 2A power adapter. Full charge takes around 2 hours.
Clean the magnetic charging connector behind the watch with an alcohol swab to remove sweat or lint. Ensure you are using a 5V 2A wall adapter.
Download ‘boAt Crest’ from Play Store or App Store. Register via mobile OTP, tap ‘Start Setup’ → ‘Add Device’ → Select ‘Lunar Fit’, and confirm the pairing prompt on your watch screen.
Ensure the watch is connected in the Crest app (BLE 5.1). Next, connect to ‘Lunar Fit_BT’ in your smartphone’s Bluetooth settings to route call audio through the watch speaker and mic.
Sleep tracking requires wearing the watch securely overnight for at least 3 hours. Night sleep classification tracks Deep, Light, REM, and Awake stages.
Yes, it has an IP68 rating, providing complete protection against dust, sweat, and rain splashes during workouts. Avoid hot water, steam, and saunas.
If you require further technical assistance or warranty support, contact boAt care:
Official Support & Troubleshooting Guide boAt Stone Vibe Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual 25W Sound 2.6"…
Official Support & Troubleshooting Guide boAt Nirvana Luxe Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual 100W Spatial 360°…
Official Support & Troubleshooting Guide boAt Party Pal 600 Complete Setup, Specifications, TWS Pairing & Exhaustive Troubleshooting Manual 160W RMS…
Official Support & Troubleshooting Guide boAt Stone 1200 Pro Complete Setup, TWS Pairing, Technical Specifications & Exhaustive Troubleshooting Manual 60W…
Official Support & Troubleshooting Guide boAt Watch Wave Active Complete Setup, Technical Specifications & Exhaustive Troubleshooting Manual 1.96" HD Expansive…
Official Support & Troubleshooting Guide boAt Wave Spectra Complete Setup, Technical Specifications & Exhaustive Troubleshooting Manual 2.04" AMOLED Massive Super…