Categories: Boat Support

boAt Watch Vertex

boAt Watch Vertex

Complete FAQ & Troubleshooting Guide

200 mAh Battery Backup | 10m Bluetooth Wireless | -20°C – 60°C Water Resistance

Information compiled and verified from the official boAt Watch Vertex support page.

200 mAh
Battery Backup
10m
Bluetooth Wireless
-20°C – 60°C
Water Resistance

About the Watch Vertex

Watch Vertex is our all-new smartwatch that’s built to improve your lifestyle and push you closer to your fitness goals. Its large 1.69-inch full capacitive touch display allows you to control everything. Enjoy going on hikes? Vertex is the perfect travel partner with its extra-long battery of up to 10 days.

Technical Specifications

Specification Details
Model Vertex
Bluetooth Range 10m
Battery Capacity 200 mAh
Bluetooth Version V 5.1
Operating Temperature -20°C – 60°C
Water Resistance IP67
Working Time Up to 7-10 days

Frequently Asked Questions & Troubleshooting Guide

Setup, Bluetooth & Connectivity

Q: How to install the boAt ProGear App?

• Step 1: Via QR Code Scanning
• Find the QR code on the product manual of the Watch Xplorer O2 for installing the ProGear App on the media devices of the users.
• Open the QR Code Scanner app on the user’s devices and scan the code present on the user manual of the Watch Xplorer O2. Thereafter, follow the on-screen instructions to install the ProGear app on the user’s device.
• Step 2: Via searching the App on Google Play or Apple Play Store​
• On Google Play or Apple App Store, in the search-bar, type ‘boAt ProGear App’ and enter search.
• You will see the boAt ProGear app in the search result list.
• Click on the install button to install boAt ProGear app on the user’s media device.

Q: How to connect the device with the App?

• Step 1:​After installing the boAt ProGear app, turn the watch Xplorer O2 ON and open the boAt ProGear app on the user’s device.
• Click on the ‘Start Setup’ on the boAt ProGear app to switch on the Bluetooth on the user’s device.
• Step 2:​The previous process would enable the user to search for the Watch Xplorer O2 to connect with the ProGear app.
• Step 3:​Once the Watch Xplorer O2 is found via Bluetooth, it will show on the ProGear app.
• Click on the ‘Xplorer O2’ Device and then click on the ‘Confirm BindDevice’ button to start paring Watch Xplorer O2 with the boAt ProGear app.
• Once the connection is successful all the fitness data stored on the Watch Xplorer O2 will sync automatically on the ProGear app.
• To use all the features of the Watch Xplorer O2 seamlessly, tap on ‘Yes’ to the connection and ‘grant access’ system prompt.
• To get the data more accurately, enter all your personal details on the app.
• Note: To ensure connectivity throughout your journey, make sure the app is allowed to run in the background of the phone all the time.​

Q: What to do if the smartwatch is unable to connect with the phone?

• Make sure you are using Android 9.0/ IOS 13.0 or above OS version in your smartphone.
• It is necessary to accept and agree to all the terms and permissions including the location services also.
• Make sure you have downloaded boat ProGear app in your smartphone.
• Do not connect the watch directly with the phone’s Bluetooth, make sure you are connecting it via the boat ProGear app.
• Make sure your Bluetooth is on and try to bind the watch with the app. Once the device is discoverable, it will display on the app screen, click to connect the device with the app.
• If you still continue to have binding issues, please restart your phone and try again.

Q: What to do if the smartwatch often disconnects from the watch?

• The operational distance for the Bluetooth is 10m. It is ideal that phone and watch is in direct contact with each other.
• If still the Bluetooth is disconnecting, close the app, switch off and on the Bluetooth and start the app again.
• Make sure the app is running in background always.

Q: Can the user use the smartwatch out of phone’s Bluetooth range?

• Yes, step counting, heart rate monitoring, calorie count, spO2, BP, time can be recorded directly on your watch while your phone is not connected.
• Watch has some internal memory to record this data.
• Once you are in contact with your phone, you can sync the data to the app.

Q: What to do if the data is taking too long to sync on the app?

• In order to sync the data to the boAt ProGear app, connect the watch Xplorer O2 to the media device via the ProGear app and go to the app’s homepage, drag down the screen.
• This will start the syncing process and data will be synced to the app.
• Make sure you are in Bluetooth range and watch and ProGear app are nearby when you are syncing the data.
• If the app is taking too long time to sync or it gets stuck while syncing, unbind the device with the app and reconnect again.
• Note: Try to sync the data of the app at least once in every 7 days to avoid huge data to be synced in a single go and to avoid any data loss.

Charging & Battery Life

Q: What to do if the smartwatch is not charging or if the battery life is low?

• ​Check if the charging connector behind the watch is clean and rust free.
• Try cleaning it with an alchohol swab.
• If the problem still persists, kindly replace the product.

Q: How to check battery charge status?

• Battery charge status is shown on the watch homepage with the percentage of the charge remaining on the watch Xplorer O2’s battery.

Q: What are the charging norms and guidelines?

• Before using the Watch Xplorer O2 for the first time, please fully charge the smartwatch first.
• Charging through wall adapter – Specs of the adapter: 5V, 2A
• Any other accessories could be used for charging the Watch Xplorer O2 as long as the above norms are followed.

Display, Features & Performance

Q: What to do if the user is not able to adjust volume of the music player?

• Yes, users can control music from your watch. Previous/next/volume up/Volume down can be adjusted from the watch. Users have to enable the feature from the appfirst.

Q: Can I adjust the screen brightness and screen out time?

• Yes. Screen brightness and screen time out can be adjusted from settings option. You can also long press the home screen to increase the brightness.

Q: How to change the watch faces on the device?

• Step-1: Go to the Menu of the watch
• Step-2: Inside the menu, select the ‘Setting’ option
• Step-3: Inside the ‘Setting’ option, scroll down and select the ‘Watch Faces’ option.
• Step-4: Swipe to see all the available watch face options and select your preferred watch face.
• Alternate Step: Long Press on the home screen to switch between the watch faces on the watch Xplorer O2.

Q: The user is facing issue with Phone Finder. The sound does not come, nor does the camera flash work. How to resolve this?

• Kindly make sure that if the sound is not turned off from Phone (for Phone Ringing) and Camera permission is allowed which is required for flash light to work. Also, check in some of the phones the physical switch for volume is “Not Turned Off”.

Health, Calling & Microphone

Q: What to do if the smartwatch is not getting call or message notifications?

• Make sure call alert and message alert are enabled from the app.
• Sync the watch after enabling these features
• Even if the notifications are not coming, switch off your phone’s Bluetooth and again switch on OR restart your phone
• Try uninstalling and installing the boAt ProGear app and then start binding process with the watch and check if the issue is still persisting or not.
• Reset the watch and check if the function is working or not​

Q: What to do if unable to record sleep data or records incorrectly?

• Make sure you wear the watch while sleeping in order to track the sleep data.
• Sleep data is estimated by primarily movement. Once you are laid down, watch will take approximately an hour to assume that you have gone to sleep.

Q: What to so if the heart rate monitor is not taking the reading well. What can be the issue?

• Check if the user is having hairs, tattoo, skin complexion, scaring, wear the watch too lose or too tight might affect the readings.
• Check if the heart rate sensor which is there on the bottom of the watch is glowing in green or not. If the sensor is working properly the sensor should glow in green colour.
• Check if the device was not subject to any mishandling, broken wires or exposed to direct sunlight or hazards like fire and liquid.

Q: Why does the watch show the step count even when I am not walking?

• Your watch is tracking the movement if your wrist so if you are doing something that requires a lot of hand movement then step count can be affected.

Q: How accurate is the Heart Rate and SpO2 data?

• Bloodpressure, spO2 and Heart Rate monitoring is only for the reference, data may not match with the medical equipment. This watch is not a medical grade equipment.

Device Troubleshooting & FAQs

Q: What to do if the blood Pressure is not showing accurate data?

• Blood pressure monitoring is only for the reference, data may not match with the medical equipment. This watch is not a medical grade equipment.
• General FAQs
• ============
• Technology
• Device Controls
• Water / Dust Protection

Q: What is “relax” mode in the watch?

• Relax mode is the meditative breathing mode to improve your breathing. Select time 1 min or 2 min for how long you want to do the meditation. Watch will vibrate to notify to when to inhale and when to exhale.

Q: Does watch Xplorer O2 has camera control feature?

• Yes, you have to shake your wrist to click photos or click the tick button on the screen to take photos. Make sure you open camera from the app and use shutter from the watch.

Q: What is blood Oxygen feature in the watch?

• Inside the menu, click on the ‘Blood Oxygen’ icon while wearing the watch on the wrist.
• Bring your wrist close to your heart and try to hold the arm still.
• This will enable the watch to show the reading of the spO2 in the blood of the user on the watch’s screen.

Q: How do I switch ON Watch Xplorer o2?

• Long press the button located on the right side of the Watch XplorerO2, it would lead to turning the watch ON. Raise your wrist to wake up the screen of the watch.

Q: How do I switch OFF Watch Xplorer O2?

• While the Watch Xplorer O2 is On, go to the setting option in the main menu and then tap on shut down shutdown option, this would lead to turning the watch off.

Q: How do I navigate to the main menu?

• Swiping left on the Watch Xplorer O2’s home screen would lead to opening the menu.

Q: How do I enter into different modes/options?

• While the user is inside the menu, tapping the several icons would lead to entering the different modes on the Watch Xplorer O2.
• There are following mode options on the menu of the Watch Xplorer O2 –
• (i) Sport – For tracking the exercises done by the users.
• (ii) Heart Rate – For measuring the heart rate of the users.
• (iii) Guided Breathing Mode – For breathing exercise of the users
• (iv) Alarm – To set up alarm for the users
• (v) Music Control – To control the music from the watch when the users are listening to music
• (vi) Timer – To set up timer for the users when in need
• (vii) Settings – To enter in to the settings of the watch

Q: How do I track the exercises via Sports mode into different modes/options?

• There are 10 different exercises which can be tracked via Sports Mode.
• (i) Outdoor Cycle (GPS) (ii) Pool Swim (iii) Outdoor Walk (GPS) (iv) Outdoor Run (GPS) (v) Hiking (GPS) (vi) Indoor Run (vii) Indoor Walk
• Select any one of the exercises before starting that particular exercise.
• Short press side button to start/pause that particular exercise
• To stop that particular exercise tracking session, long press the side button.

Q: How can I measure blood oxygen levels?

• Inside the menu, click on the ‘Blood Oxygen’ icon while wearing the watch on the wrist.
• Bring your wrist close to your heart and try to hold the arm still. This will enable the watch to show the reading of the spO2 in the blood of the user on the watch’s screen.

Q: How can I switch on the relax mode?

• Inside the menu, click on the ‘Relax’ icon while wearing the watch on the wrist.
• Choose your preferred time for breath in and breath out and relax to undergo the breathing exercise.

Q: How can I use ‘Music Control’?

• Inside the menu, click on the ‘Music Control’ icon on the watch to enter into the music control feature.
• While listening to music users can play, Pause, move back to previous track, jump forward to next track and control the volume of the music.

Q: Can the vibrations be modified on the watch?

• Yes, there are different types of vibrations associated with each feature. Like for message alert you can change the vibration type from the app while enabling the message alert.

Q: How many sports mode can be accessed at once?

• There is total 10 sports modes available in the watch. Walk, run, cycling, climb, yoga, basketball, football, badminton, skipping, swim. You can access any one out of these.

Q: How to check notifications in watch Xplorer O2?

• Swipe down on the home screen of the watch to review the notifications of the connected media device.
• Swipe up to the last page to delete all notifications.

Q: What is the ” Wake Gesture ” feature?

• When the “Wake Gesture” feature is enabled, the watch display will turn “ON” when you lift your wrist to view the watch.

Q: Can users find their phone using Xplorer O2 Watch?

• Yes. Users can find your connected phone using the Xplorer O2 watch.
• Step 1: Move to the ‘Find Phone’ option and tap on it.
• Step 2: Your phone will start ringing.
• Step 3: Tap on pause button to stop it.

Q: Is the watch water proof?

• The watch is 5 ATM water resistant. It can withstand sweat, dust and splash of water. Not recommended to use in deep waters beyond 5 mtrs, while swimming or while taking bath.
• NoYes

Need More Help?

For additional support and warranty queries, please contact boAt support:

Phone: 022-6918-1920 (9 AM – 7 PM, Closed Sundays & Holidays)

WhatsApp: +91-9667700177 (Available for quick assistance)

Official Support Page: boAt Watch Vertex Support

Recent Posts

boAt Watch Wanderer

Kids 4G Calling Smartwatch Guide boAt Watch Wanderer Comprehensive User Guide, Technical Specifications & Complete Troubleshooting FAQ Manual 4G Nano-SIM…

3 hours ago

boAt Watch Primia Ace

Official Support & Troubleshooting boAt Watch Primia Ace Complete User Guide, Technical Specifications & Troubleshooting Manual 1.43" AMOLED 466x466 Razor…

3 hours ago

boAt Watch Ultima Connect Max

Official Support & Troubleshooting boAt Watch Ultima Connect Max Complete User Guide, Technical Specifications & Troubleshooting Manual 2.0" Screen Ultra-Large…

3 hours ago

boAt Watch Xtend Talk

Official Support & Troubleshooting boAt Watch Xtend Talk Complete User Guide, Technical Specifications & Troubleshooting Manual Alexa Built-in Hands-Free Voice…

3 hours ago

boAt Lunar Call Plus

Official Support & Troubleshooting boAt Lunar Call Plus Complete User Guide, Technical Specifications & Troubleshooting Manual 1.43" AMOLED Always-On Display…

3 hours ago

boAt Watch Wave Electra

Official Support & Troubleshooting boAt Watch Wave Electra Complete User Guide, Technical Specifications & Troubleshooting Manual 1.81" HD Large Color…

4 hours ago