EvoFox One X Tri-Mode

The box contains:
• EvoFox One X Wireless Gamepad
• 2.4GHz Nano Receiver•Type C Charging Cable
• USB Extender Cable
• Quick Start Guide

Yes. Both joysticks and the LT/RT triggers use magnetic Hall Effect sensors for zero drift, longer lifespan, and smooth analog control.

Yes. It features On-the-Fly Gyro (activated by holding NL) and Native Gyro in Nintendo Switch Mode, enabling accurate motion control in compatible titles including Steam games.

The controller includes four programmable buttons (NL, NR, ML, MR). NL and NR are assigned to Gyro and Precision Mode by default but can be remapped to Macros.

Start with the controller off → Long-press the 2.4G button for 3 seconds until LED 3 blinks rapidly → Insert the USB receiver and long-press the receiver button → When paired, the Blue LED and RGB will turn stable.

Long-press the BT button for 3 seconds → LED 2 and Pink RGB blink rapidly → Select “Xbox Wireless Controller” on your device → LED turns solid when connected.Connect the USB Type-C cable to your PC or console.

On your Switch, go to Controllers → Change Grip/Order. Hold the NS button for 3 seconds until LED1 flashes red. When connected, LED1 stays solid and ABXY switches to the Nintendo layout.

While in 2.4G mode, press and hold Start + Select until indicator LEDs change: LED3 = X-Input, LED4 = D-Input, LED1 = Switch-Pro.

Press Fn + NL/NR/ML/MR → Orange LED blinks → Enter your button sequence (max 20 inputs, 60 seconds) → Press the same button again to save.

Press Fn + chosen Macro button and wait for the Orange LED, then press the button again to delete the macro. Long-press Fn for 5 seconds to disable all macros at once.

Hold NR to instantly reduce right-stick sensitivity to 50% for precision aiming. Release to return to normal sensitivity.

Press Fn twice to enable Breathing Mode → Hold Fn and press Start/Select to cycle colours → Press Fn twice again to turn RGB off.

It has an 800mAh rechargeable battery with Type-C fast charging support.

Yes. It enters sleep after 1 minute when not connected, and after 10 minutes of inactivity to save power.

Nintendo Switch / Lite / OLED, Windows 7/8/10/11, Android 8+, iOS / iPadOS / macOS 13.4+, and Steam OS.

Use dedicated one-touch mode buttons to switch instantly between BT, 2.4G and Switch modes.

If the controller becomes unresponsive, insert a pin into the Reset button on the back to restart hardware settings.

Turn the controller off → Place on a flat surface → Hold B + Select + BT for 1s → Rotate both sticks fully → Press Start to complete calibration.