boAt Aavante Bar 1400
Complete Setup, Specifications, HDMI/Optical TV Audio & Exhaustive Troubleshooting Manual
Overview: boAt Aavante Bar 1400
The boAt Aavante Bar 1400 packs 140W RMS 2.1 channel cinema power into a sleek soundbar design with a dedicated wired subwoofer, Bluetooth v5.0, HDMI (ARC), Optical audio, USB playback, 3.5mm AUX, and preset EQ modes including 3D Surround Sound for full immersion.
Step-by-Step Setup & Configuration Guide
1. Subwoofer Connection
Connect the subwoofer cable into the ‘SUB OUT’ port on the soundbar rear panel.
2. HDMI ARC Connection to TV
Connect HDMI cable from TV’s HDMI ARC port to soundbar. Set TV Sound → Digital Audio Output → PCM. Enable HDMI-CEC.
3. Optical Connection
Insert Optical cable into TV Optical Out and soundbar OPT IN. Press OPT on the remote.
4. Bluetooth Pairing
Press BT on the remote. Find ‘Aavante Bar 1400’ on your device and pair.
Technical Specifications
| Specification | Details |
|---|---|
| Model Name | boAt Aavante Bar 1400 |
| Total Audio Power | 140W RMS (2.1 Channel Configuration) |
| Soundbar Power | 100W RMS (2 x 50W Drivers) |
| Subwoofer Power | 40W RMS Wired Heavy Bass Subwoofer |
| Bluetooth Version | v5.0 (Up to 10 Meters Range) |
| Power Input | AC 110V – 240V / 50-60Hz Mains |
| Connectivity | HDMI (ARC), Optical (TOSLINK), Bluetooth v5.0, 3.5mm AUX, USB |
| EQ Presets | Movie, Music, News, 3D Surround Sound |
| Remote Control | Dedicated Master Remote Control Included |
Exhaustive Frequently Asked Questions & Troubleshooting Manual
HDMI ARC & TV Setup FAQs
Q: No sound from TV via HDMI ARC — how to fix?
Ensure cable is in the HDMI ARC port. Set TV audio output to PCM. Enable HDMI-CEC. Power cycle both devices.
Q: Can I control volume with my TV remote?
Yes, enable HDMI-CEC on both TV and soundbar so TV remote controls soundbar volume.
Subwoofer Troubleshooting FAQs
Q: No bass from subwoofer — how to fix?
Check subwoofer cable in SUB OUT port. Ensure SUB volume is not at minimum. Try a replacement cable if issue persists.
Q: How do I maximize bass output?
Press BASS + on the remote and select the Movie EQ preset for the deepest bass response.
Bluetooth FAQs
Q: How do I pair my phone with Aavante Bar 1400?
Press BT on the remote → search for ‘Aavante Bar 1400’ on your phone → tap to connect.
Q: Bluetooth disconnects frequently — solution?
Stay within 10 meters. Remove old pairings and re-pair. Power cycle the soundbar.
General Troubleshooting FAQs
Q: Soundbar powers off automatically — normal?
Yes, auto-standby activates after 15 minutes of no audio signal to save power.
Q: How to factory reset?
Hold POWER button for 5–8 seconds until the display resets. All pairings are cleared.
Need Official boAt Support?
Contact boAt Customer Care for warranty and technical assistance:
WhatsApp: +91-9667700177
Support Page: boAt Aavante Bar 1400 Official Support