Categories: Boat Support

boAt Rockerz 150 Pro – Complete Support Guide with Specifications & FAQs

📄 Original Source: boAt Official Support – Rockerz 150 Pro

boAt Rockerz 150 Pro

Neckband Earphones with 150 Hrs Playtime, BEAST™ Mode & Dual Pairing

Extraordinary, All-Day Audio

Rockerz 150 Pro is a wireless neckband combining cutting-edge technology with unmatched comfort:

  • 10mm Drivers – boAt Signature Sound & Balanced EQ modes
  • Up to 150 Hours Playtime – Up to 120 hours talk time
  • BEAST™ Mode – 65ms low latency for casual gaming
  • ASAP™ Charge – 10 min charge = 150 min playtime
  • Dual Pairing – Connect two devices at once
  • Bluetooth 5.2 – Stable 10m connection
  • IPX5 Water Resistant – Built for durability

Key Features at a Glance

🎵 150 Hours Playtime

Music playtime, with up to 120 hours talk time

⚡ ASAP™ Charge

10 mins charging = 150 mins playtime

🎮 65ms BEAST™ Mode

Low latency mode for casual gaming

🔗 Dual Pairing

Connect two devices at the same time

Full Specifications

Specification Details
Type Bluetooth Wireless Neckband Earphones
Bluetooth Version V5.2
Driver Size 10mm × 2
Music Playtime Up to 150 Hours per charge
Talk Time Up to 120 Hours per charge
Battery Capacity 2 × 220mAh
Charging Time 60 Minutes
Charging Interface USB Type-C
Frequency Response 20Hz – 20kHz
Operating Range 10 Meters
Water Resistance IPX5
Dual Pairing Yes
BEAST™ Mode Yes; 65ms Low Latency
ASAP™ Charge Yes; 10 mins charge = 150 mins playtime
aptX Codec No
cVc Technology No

📄 Official User Manual

A user manual reference image is available on the official boAt support page.

Technology & Features

BEAST™ Mode (Low Latency)

Rockerz 150 Pro features 65ms low latency BEAST™ Mode for entertainment needs. It’s suitable for casual gaming, but not intended for professional gaming equipment needs. Press the MFB 3 times to activate; a voice prompt confirms activation. Press MFB 3 times again to deactivate.

EQ Sound Modes

Rockerz 150 Pro offers Signature Sound Mode (default) and Balanced Mode. Press the MFB 2 times to switch to Balanced Mode (voice prompt confirms); press MFB 2 times again to switch back to Signature Sound Mode.

ASAP™ Charge Technology

10 Minutes = 150 Minutes of Playtime

boAt’s patented fast-charging technology provides exceptional battery efficiency (may vary by conditions). For ASAP™ Charge to work effectively, use a Type-C 5V/3A adapter, and follow the charging norms in your product smart guide.

Dual Pairing

To enable Dual Pairing, pair each device separately while Rockerz 150 Pro is in pairing mode – once paired, both devices stay connected. Music plays through one device at a time, and automatically shifts to the second device when playback is paused on the first, or when the second device receives a call.

Multifunction Button (MFB) Controls

Action Function
Press & hold MFB (3 sec) Power ON / Enter pairing mode (blue LED flashes 1 sec)
Press & hold MFB (5 sec) Power OFF (red LED flashes 1 sec)
Press & hold MFB (10 sec) in power off mode Factory Reset / Clear paired devices (blue & red LEDs flash 5 times)
Short press MFB once Play/Pause, Answer/End call
Press MFB 2 times Reject call (during ring)
Press & hold MFB (2 sec) Activate Voice Assistant
Press MFB 3 times Toggle BEAST™ Mode (low latency) on/off
Press MFB 2 times Toggle Balanced Mode / Signature Sound Mode
Press & hold Volume Up (2 sec) Next Track
Press & hold Volume Down (2 sec) Previous Track
Short press Volume +/- Adjust Volume

Note: The neckband automatically turns off if no pairing is established within 5 minutes of entering pairing mode. The MFB press count for BEAST Mode (3x) and EQ Mode (2x) is the same button used for reject-call (2x) and other functions – only available when not on an active call.

Pairing & Connectivity

Initial Pairing

  1. Press & hold the MFB for 3 seconds to power on and enter pairing mode
  2. The blue and red LEDs flash alternately to indicate pairing mode
  3. Open Bluetooth settings on your device and search for ‘Rockerz 150 Pro’
  4. Select the device from the list; enter passcode 0000 or 1234 if prompted
  5. Once connected, the blue LED flashes every 10 seconds to confirm pairing

LED Indicator Guide

  • Power ON: Blue LED flashes for 1 second
  • Power OFF: Red LED flashes for 1 second
  • Pairing mode: Blue and red LEDs flash alternately
  • Auto pairing status: Red and blue LEDs flash three times simultaneously before entering pairing state
  • Connected: Blue LED flashes every 10 seconds
  • Factory reset successful: Blue and red LEDs flash 5 times
  • Charging: Solid red LED
  • Fully charged: LED turns off
  • Low battery (below 20%): Red LED flashes quickly every few seconds with a “Low Battery” voice prompt every 5 minutes

Charging & Battery

How to Charge

  • Plug the provided USB Type-C cable into the earphones and connect the other end to a computer or wall adapter
  • Use a 5V/2A wall adapter and a standard cable with 35 strands @ 0.10mm diameter/strand
  • Full charge takes up to 60 minutes
  • Solid red LED indicates charging; the LED turns off once fully charged
  • Note: The earphones cannot/shouldn’t be turned on while charging

Troubleshooting Guide

Bluetooth Connectivity Issues

Neckband not connecting via Bluetooth
  1. Ensure the earphones are in pairing mode (alternating red/blue LED flashes) by holding the MFB for 5 seconds
  2. Confirm the device is within 10m range with no obstructions
  3. Clear the pairing list by holding the MFB for 10 seconds in power off mode (red & blue LEDs flash 5 times to confirm)
  4. If prompted for a passcode, try 0000 or 1234
  5. Check for software issues on your phone; try forgetting the device or updating mobile software
Dual pairing not working
  1. Pair to the first phone as per usual procedure, then switch off the earphones
  2. Switch the earphones back on, enter pairing mode, and pair to the second phone
  3. Switch off the earphones once more, then switch on normally (short press until light comes on) so they auto-reconnect to the second phone
  4. On the first phone, find “Rockerz 150 Pro” in Bluetooth settings and pair to it as well – both phones should now be connected
  5. Try dual pairing with other devices to isolate the issue
One side keeps disconnecting
  1. Restart the device
  2. Try a factory reset
  3. Check if the same issue happens on different devices and media players
  4. Clear any obstructions and move the device closer to the earphones

Charging Issues

Earphones not charging or battery life is low
  1. Test the charging cable with another device
  2. Use only a 5V/2A wall adapter
  3. Check the charging is done until the red LED turns off, indicating a full charge
  4. Verify the battery wasn’t tampered with or exposed to electrical damage
  5. Check for dirt or debris in the charging port and clean with a cotton swab
  6. Confirm the adapter and cable support fast charging

Sound Issues

Sound is distorted, low volume, low bass, or muffled
  1. Set your phone’s equalizer to normal/default/none/zero (see phone-specific EQ paths below)
  2. Try factory resetting the device
  3. Move closer to the connected device and remove obstructions
  4. Test with different media players and devices to isolate the issue
  5. Clean ear wax buildup with a cotton swab and alcohol, then gently blow dry from a distance
Volume changes automatically
  1. Check equalizer settings on the connected device
  2. Test with a different media player or device to isolate the issue

Power & Control Issues

Earphones not turning on
  1. Confirm the device has been fully charged first, until the red LED turns off
  2. Use only 5V/2A chargers
  3. Check for mishandling, broken wires, or exposure to direct sunlight or fire hazards
Built-in controls not working
  1. Unpair/Forget the device and pair again
  2. Test controls when connected to a different device
  3. Verify the media player supports Bluetooth controls
  4. Check for physical damage or hazard exposure

Microphone Issues

Microphone not working
  1. Try factory resetting the device
  2. Ensure no objects are blocking the microphone
  3. Hold the microphone at an adequate distance to pick up your voice
  4. Check it wasn’t exposed to hazards like direct sunlight or fire
  5. Check it wasn’t exposed to water beyond its resistance rating or dipped in liquid

Phone-Specific EQ Settings

Phone Brand EQ Path
Vivo i Music > Audio effect > Deep space sound effects > Equalizer
Xiaomi Settings > Sound & vibration > Sound effects > Graphic equalizer
Samsung Settings > Sound quality and effects > Equalizer
Realme Settings > Sound > Equalizer (varies by UI version)
Oppo Settings > Sound & vibration > Equalizer
Apple Settings > Music > EQ
Motorola Settings > Sound > Audio effects
Poco Settings > Sound & Vibration > Graphic Equalizer
OnePlus Settings > Sound Quality & Effects > Audio Tuner

Frequently Asked Questions

How long is the battery life?

Rockerz 150 Pro offers up to 150 hours of music playtime and up to 120 hours of talk time per charge. Full charging takes up to 60 minutes.

What is ASAP™ Charge?

boAt’s patented fast-charging technology that provides up to 150 minutes of playback from just 10 minutes of charging (may vary by conditions). Use a Type-C 5V/3A adapter for ASAP™ Charge to work effectively.

Is it good for gaming?

Rockerz 150 Pro features 65ms low latency via BEAST™ Mode, suitable for entertainment and casual gaming, but it’s not intended for professional gaming equipment needs.

What is Signature Sound Mode and Balanced Mode?

Signature Sound Mode is boAt’s default bass-centric profile, while Balanced Mode is better suited for podcasts, news, and voice-based media. Press the MFB 2 times to switch between the two.

Can I connect two devices at the same time?

Yes, Rockerz 150 Pro supports dual pairing. Both devices stay connected, but music plays through one at a time, shifting automatically when playback is paused on the first device or the second device receives a call.

Does it support the aptX codec?

No, Rockerz 150 Pro does not support the Qualcomm aptX codec.

Does it support Qualcomm cVc technology?

No, Rockerz 150 Pro does not support Clear Voice Capture (cVc) technology.

Can I submerge my earphones in water or swim with them?

Rockerz 150 Pro earphones are IPX5 certified, meaning they can withstand a low-pressure water jet spray, but cannot withstand submersion in water. It’s recommended not to use them while swimming.

Need Help? Contact boAt Support

📞 Call Us

022-6918-1920

9 AM – 7 PM IST (Mon-Sat)

Closed on Sundays and National holidays

💬 WhatsApp Chat

Get instant support via WhatsApp for quick queries and troubleshooting assistance

Launch WhatsApp Chat

Note: This guide is based on official boAt support documentation. For the most up-to-date information, visit boAt Support

Recent Posts

boAt Rockerz Bliss

boAt Rockerz Bliss Complete FAQ & Troubleshooting Guide Spatial Bionic Sound (Dirac Virtuo™) | Touch Controls | 30-Hour Battery |…

39 seconds ago

boAt Rockerz 111

boAt Rockerz 111 Complete FAQ & Troubleshooting Guide 40-Hour Battery | ASAP™ Charge | Dual Pairing | ENx™ | Low…

3 minutes ago

boAt Rockerz 110

boAt Rockerz 110 Complete FAQ & Troubleshooting Guide 40-Hour Battery | ASAP™ Charge | Dual Pairing | ENx™ | Low…

5 minutes ago

boAt Rockerz 109 – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz 109 with 40 hours playback, ENx™ technology, BEAST™ Mode, ASAP™ Charge, specifications, troubleshooting, and complete…

9 minutes ago

boAt Rockerz Enticer – Complete Support Guide with Specifications & FAQs

Comprehensive guide for boAt Rockerz Enticer with Graphene drivers, Quick Switch, BEAST Mode, ASAP™ Charge, specifications, troubleshooting, and complete setup…

12 minutes ago

boAt Rockerz 330 Anc

boAt Rockerz 330 ANC Complete FAQ & Troubleshooting Guide DIRAC Opteo™ | Active Noise Cancellation (25dB) | ENx™ | 24-Hour…

13 minutes ago