boAt Watch Ultima Select
Complete Setup, Technical Specifications & Exhaustive Troubleshooting Manual
Overview: boAt Watch Ultima Select
The boAt Watch Ultima Select commands attention with an ultra-large 2.01-inch Super AMOLED display (410×502 pixels), metallic curved chassis, dual Bluetooth v5.2+v5.3 calling, 100+ active sports modes, and real-time health telemetry via the boAt Crest App.
Step-by-Step Setup & Configuration Guide
1. Full Charge
Connect Watch Ultima Select to its magnetic charger and charge for 2 hours with a 5V 2A adapter before first boot.
2. boAt Crest App Setup
Download ‘boAt Crest’ from Play Store or App Store, register via OTP, and accept Bluetooth and Location permissions.
3. Device Pairing
Tap ‘Add Device’ → Select ‘Ultima Select’ → Confirm pairing on the watch screen.
4. Calling Setup
Pair with ‘Ultima Select_BT’ in phone Bluetooth settings for direct on-wrist calls.
Technical Specifications
| Specification | Details |
|---|---|
| Model Name | boAt Watch Ultima Select |
| Display Type | 2.01″ (5.10 cm) Super AMOLED Curved Screen (410 x 502 pixels) |
| Bluetooth Calling | Yes (BLE 5.2 + BLE 5.3 Dual Mode, Dial Pad, HD Speaker & Mic) |
| Battery Capacity | 280mAh Lithium Polymer (25 Days Standby) |
| Battery Life | Up to 7 Days Normal Usage / 3 Days BT Calling |
| Charging Type | Magnetic Pogo Cable (5V / 2A Input, ~2 Hours) |
| Water Resistance | IP68 Dust, Sweat & Splash Resistance |
| Sports Modes | 100+ Active Sports Tracking Modes |
| Companion App | boAt Crest App (Android 7.0+ & iOS 12.0+) |
Exhaustive Frequently Asked Questions & Troubleshooting Manual
Super AMOLED Display & Charging FAQs
Q: How do I charge Watch Ultima Select?
Attach the magnetic pogo-pin cable to the rear charging contacts of the watch and connect to a certified 5V 2A power adapter. Full charge takes around 2 hours.
Q: What should I do if the watch is not charging?
Clean the magnetic charging connector behind the watch with an alcohol swab to remove sweat or lint. Ensure you are using a 5V 2A wall adapter.
boAt Crest App Setup & Bluetooth Calling FAQs
Q: How do I pair Watch Ultima Select with the boAt Crest App?
Download ‘boAt Crest’ from Play Store or App Store. Register via mobile OTP, tap ‘Start Setup’ → ‘Add Device’ → Select ‘Ultima Select’, and confirm the pairing prompt on your watch screen.
Q: How do I configure Bluetooth Calling audio?
Ensure the watch is connected in the Crest app (BLE 5.2). Next, connect to ‘Ultima Select_BT’ in your smartphone’s Bluetooth settings to route call audio through the watch speaker and mic.
Health Sensors, Stress & Water Resistance FAQs
Q: Why is sleep tracking not recording accurately?
Sleep tracking requires wearing the watch securely overnight for at least 3 hours. Night sleep classification tracks Deep, Light, REM, and Awake stages.
Q: Is Watch Ultima Select waterproof?
Yes, it has an IP68 rating, providing complete protection against dust, sweat, and rain splashes during workouts. Avoid hot water, steam, and saunas.
Need Official boAt Support?
If you require further technical assistance or warranty support, contact boAt care:
WhatsApp Support: +91-9667700177
Official Support Page: boAt Watch Ultima Select Support